Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

  • Left Hand (Driver Side)
  • Includes lens, housing, and mounting panel
  • Includes Integrated parking/marker lamp
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Headlight (0:39)
    • Remove the plastic panel over the radiator by removing the seven clips with a flat blade screwdriver
    • Pull the panel up and out
    • Pull back the wheel well panel
    • Remove the Phillips screw or 10mm bolt from the headlight bracket behind the wheel well panel
    • Pull the bumper cover forward
    • Remove the 10mm bolt from the bumper
    • Remove the 10mm bolt behind the bumper on the headlight
    • Remove the two 10mm bolts from the headlight bracket
    • Pull the headlight out and over the bumper
    • Disconnect the headlight wiring harness
  2. step : Servicing the Bulbs (2:16)
    • Twist the bulb socket counterclockwise out the turn signal light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the turn signal light
    • Remove the dust cover from the head light
    • Push the retaining clip up and over
    • Remove the bulb off of the socket
    • Push on the new bulb
    • Push the retaining clip back over
    • Replace the dust cover
  3. step : Installing the New Headlight (3:09)
    • Transfer the bulbs from the old headlight to the new one
    • Reconnect the wiring harness to the headlight
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 10mm bolts into the headlight bracket
    • Replace the 10mm bolts on the headlight and bumper
    • Place the plastic panel over the radiator
    • Insert the seven clips into the plastic panel
    • Replace the Phillips screw or 10mm bolt from the headlight bracket behind the wheel well panel

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1996-1998Honda Civic Honda Civic Headlight Driver Side
Part #: 1ALHL00520

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:57 min)