Replaces

1996-97 Honda Accord Tail Light Driver Side - 1ALTL00203

This replacement tail light is just what you need to get your Honda Accord in good looking form again!

This Honda tail light features the following specifications:

  • LH (driver's side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Honda Accord tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Changing a Bulb (0:52)
    • Turn the clip and remove the access panel behind the taillight.
    • Twist the socket free.
    • Pull the bulb out.
    • Push a new bulb into place.
    • Twist the socket back into place.
  2. step : Removing the Taillight (1:45)
    • Remove the wire clips from the bolts.
    • Remove the four 8mm nuts from the back of the taillight.
    • Pull the taillight out and off.
    • If any studs are broken off in the car use a wrench to remove them.
  3. step : Replacing the Taillight (2:47)
    • Remove the gasket from the old taillight and place it on the new light.
    • Line up the taillight and press it into place
    • Replace the four 8mm nuts.
    • Replace the wire clips.
    • Twist the sockets back into place.
    • Replace the access panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Satisfied with this quality part
This is a quality unit. As far as I can tell it is identical to the original. The 1A Auto video mentions transferring the gasket from the old unit to the new assembly but this one came with a new gasket.
August 26, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:44 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket



This part replaces:

  • Partslink HO2800119
  • Hollander 166-58825L
  • OE # 33551SV4A03
  • TYC 11-3174-01
  • DEPO 317-1911L-US

Vehicle Fit

  • 1996-1997 Honda Accord Outer Tail Light Driver Side
Part #: 1ALTL00203

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More