Replaces

1996-02 Toyota 4Runner Window Regulator Pair - 1AWRK00337

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Quantity:   Pair
  • Operation:   Power

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT DOORS
  • DO NOT include the power window motors
  • Power operation
  • Direct replacements
  • Built to strict quality control standards

Please Note:  These window regulators are designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:44)
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry up the arm rest with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the two Phillips head screws behind the armrest
    • Push in the center of the retaining clip on either side of the door panel and pry them out
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Pry out the door handle with a flat blade screwdriver
    • Disconnect the lock rod from the door handle
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (4:00)
    • Disconnect the window motor lead
    • Hold the window up by hand
    • Remove the four 10mm bolts from the regulator
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (5:43)
    • Raise the window by hand
    • Insert the regulator onto the window track
    • Insert the four 10mm bolts into the regulator
    • Connect the window motor lead
  4. step : Reinstalling the Door Panel (6:57)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the lock rod to the door handle
    • Push the door handle in place
    • Insert the two Phillips head screws behind the armrest
    • Insert the Phillips screw into the door handle
    • Push the armrest in place
    • Push in the retaining clips on either end of the door panel

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1996-2002Toyota 4Runner Toyota 4Runner Front Power Window Regulator without Motor Pair
Part #: 1AWRK00337

Ships in 1-3 Business Days. Delivery times vary.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:02 min)