Specifications:

  • LH (Driver Side) FRONT DOOR
  • Power operation
  • Direct replacement
  • Built to strict quality control standards
  • Does not include motor

Please Note:  This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:44)
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry up the arm rest with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the two Phillips head screws behind the armrest
    • Push in the center of the retaining clip on either side of the door panel and pry them out
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Pry out the door handle with a flat blade screwdriver
    • Disconnect the lock rod from the door handle
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (4:00)
    • Disconnect the window motor lead
    • Hold the window up by hand
    • Remove the four 10mm bolts from the regulator
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (5:43)
    • Raise the window by hand
    • Insert the regulator onto the window track
    • Insert the four 10mm bolts into the regulator
    • Connect the window motor lead
  4. step : Reinstalling the Door Panel (6:57)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the lock rod to the door handle
    • Push the door handle in place
    • Insert the two Phillips head screws behind the armrest
    • Insert the Phillips screw into the door handle
    • Push the armrest in place
    • Push in the retaining clips on either end of the door panel

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-2002 Toyota 4Runner Front Power Window Regulator without Motor Driver Side

This part replaces:

  • Hollander 125-58616L
  • OE # 6980235101
  • Dorman 740-916
Part #: 1AWRG00354

How-to Video:

(10:02 min)