Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • RH (passenger's side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

This tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Changing a Bulb (0:48)
    • Remove the two Phillips screws securing the taillight.
    • Pull the taillight out.
    • Twist the socket counterclockwise.
    • Pull the bulb straight out.
    • Push the new one in.
    • Twist the socket clockwise.
  2. step : Removing the Taillight Assembly (1:41)
    • Remove the Phillips screw in the luggage shelf bracket.
    • Remove the bracket and pull the trim panel straight out.
    • Disconnect the harness connection.
    • Remove the ground bolt.
    • Pull the harness out.
  3. step : Replacing the Taillight Assembly (3:45)
    • Push the harness in.
    • Line up the taillight and push it into place.
    • Replace the two Phillips screws on the taillight.
    • Reconnect the harness.
    • Replace the bolt through the ground wires.
    • Push the trim back into place.
    • Replace the bracket and screw.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1996-2000Toyota 4Runner Toyota 4Runner Tail Light Passenger Side
Part #: 1ALTL00224


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:24 min)