Specifications:

  • Brand New, Not Remanufactured Alternator
  • 90 Amps
  • No core charge
  • Direct replacement
  • Built to strict quality control standards
This replacement alternator is just what you need to get your vehicle in good working order again. If your battery is no longer being charged completely, or at all, this alternator may be the solution for you.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnect your battery (1:00)
    • Use your 10 mm wrench to disconnect your negative battery terminal.
  2. step : Remove the alternator (1:10)
    • Loosen up the engine pulling hook.
    • Unbolt the two 12 mm bolts securing it using your socket, ratchet, extension and flex joint.
    • Remove the 12 mm nut and the 14 mm bolt on the alternator to remove it.
    • Unbolt the 10 mm bolt securing the wiring clip.
    • Disconnect the power leads using a 10 mm socket and ratchet and a flat blade screwdriver to unplug and disconnect.
    • Use a 10 mm socket and ratchet to loosen up the tensioner and bracket bolts to release the serpentine belt.
    • Keep your serpentine belt routing diagram handy for reinstallation.
  3. step : Install the new alternator (6:50)
    • Apply some white grease to the mounting surface to assist with re-installation.
    • Put the alternator into its mounting and bolt in the 10, 12, and 14 mm nuts and bolts mounting it.
    • Use a rubber mallet to help get the alternator and bolts in place.
    • Reconnect the leads with your 10 mm socket and ratchet.
    • Use your routing diagram to replace the serpentine belt.
    • Make sure you check the smooth side of the serpentine belt for cracks, frays and flaws and replace if you find any.
    • Tighten the tensioner and bracket bolts.
    • Reconnect the negative battery terminal with your 10 mm socket and ratchet.

Tools needed for replacement:

    General Tools

  • Telescope magnet

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Swivel
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 12mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1995-1997Honda Accord Honda Accord 90 Amp Alternator V6 2.7L

This part replaces:

  • Lester 13648
Part #: 1AEAL00242


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:47 min)