This replacement grille is just what you need to get your Ford Ranger in good looking form again!

This grill features the following specifications:

  • Injection molded plastic
  • Can come either black or gray and is intended to be paint to match
    • Can be painted by the buyer to any color desired or installed as is
  • High quality item that is built to strict quality control standards
  • Direct bolt on
  • Has proper area for the Ford emblem (not included)

Makes a great replacement and has substantial cost savings over a stock dealer grille.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Handling the Bulbs (1:23)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace just the headlight bulbs (1:27)
    • Pop the hood and secure it.
    • Reach behind the head light assembly and remove the bulb.
    • Reverse the process to install.
  3. step : Remove the grille (3:08)
    • Remove the six Phillips screws
    • Pull the grille off.
  4. step : Remove the parking light assembly (3:55)
    • Remove the 11 mm nut to pull out the parking light assembly.
    • Unclip the parking light assembly
    • Unplug the wiring harness and bulb
  5. step : Remove the headlight assembly (4:55)
    • Pull up the tabs anchoring the head light assembly
    • Pull out the head light assembly
    • Disconnect the wiring harness.
  6. step : Aim the headlights (6:05)
    • Adjust the adjustor screws to match the old headlight using a Phillip's screwdriver
  7. step : Install the new headlight assembly (7:10)
    • Plug in bulbs and harness
    • Clip into place
    • Bolt in using your 11mm socket and ratchet
  8. step : Install the grille (9:55)
    • Put it into place
    • Secure with the six Phillips screws and Phillips screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-1997 Ford Ranger Black Grille

This part replaces:

  • Partslink FO1200309
  • OE # F57Z 8200 BA
Part #: 1ABGR00238

Out of Stock

How-to Video:

(12:04 min)