Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Fit guaranteed

  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.

Quality

  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.

Value

  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.

Safety

  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather..
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Headlight Assembly (0:43)
    • Remove the three T15 screws that secure the headlight.
    • If the outside screws don’t come out:
    • Brake the tabs on the headlight and use pliers to hold the brass insert while removing the screws.
    • Twist and pull out on the bulb to change it.
  2. step : Replacing the Headlight Assembly (2:24)
    • Remove the shield over the bulb hole.
    • Put the bulb into the new headlight assembly.
    • Line the headlight up and push it into place.
    • Replace the three screws.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Torx Drivers & Sockets

  • T15 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-1997 Dodge Intrepid 4 Piece Set Lighting Kit

This part replaces:

  • TYC 20-3386-01
  • TYC 20-3385-01
  • TYC 18-3300-01
  • TYC 18-3299-01
  • Hollander 114-228BR
  • Hollander 114-228BL
  • Hollander 116-989R
  • Hollander 116-989L
  • OE # 4778256
  • OE # 4778257
  • OE # 4778254
  • OE # 4778255
  • Partslink CH2503107
  • Partslink CH2502107
  • Partslink CH2521122
  • Partslink CH2520122
Part #: 1ALHT00030


How-to Video:

(03:54 min)