Replaces

1995-97 Brake Kit Front Nakamoto MD652, YL5Z1V102AA - 1ABFS00671

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      10.28" (261mm)
      Vented
      5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Replacement Brake Rotors
  • Front or Rear Location:   Front
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Brake Pad Specifications:

  • Premium Posi Semi-Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: F57Z1102C, F57Z 1102 C
  • Fits 5 lug wheels
  • Vented
  • Correct for 2WD models with Rear Wheel ABS only

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Note:
The rotors do not include wheel bearings or seals.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:07)
    • Pry off the lug nut cover
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and the tire.
  2. step : Remove the calipers (1:42)
    • Use your 1/2" socket and ratchet to remove the caliper bolts
    • Use a flat blade screwdriver or pry bar to compress the caliper pistons
    • Pry the caliper of the rotor.
    • Remove the two 15 mm caliper bracket bolts.
  3. step : Replace the rotor (4:21)
    • Pry off the grease cap.
    • Use your pliers to remove the cotter pin.
    • Remove the 27 mm nut.
    • Pull the rotor off.
    • Insert the outside bearing race.
    • Use your race installation tools to tap the race into place.
    • Install the interior race.
    • Apply bearing grease to the races.
    • Pack the interior bearing with bearing grease.
    • Use a paper towel to keep your race tools tidy and install the interior bearing.
    • Apply grease to the exterior race.
    • Clean the spindle and mount the rotor.
    • Install the exterior bearing and apply bearing grease.
    • Put the nut and washer on, and tighten it with your socket and ratchet to seat the bearing.
    • Spin the rotor and loosen the nut and then tighten it again.
    • Do this till the bearing is seated, then put the cotter pin through.
    • Replace the dust cap.
  4. step : Install the calipers (15:20)
    • Mount the caliper bracket and secure it with your 15 mm socket and ratchet
    • Torque these bolts to 80 ft lbs.
    • Compress the caliper with a C-Clamp
    • Apply anti-seize grease to the edges of the brake pads and insert them into the brackets.
    • Mount the calipers to the brackets and torque the bolts to 15 ft lbs.
  5. step : Put the wheel on (18:05)
    • Thread the lug nuts on.
    • Wiggle the wheel to make sure there isn't any play in the bearings.
    • Lower the vehicle
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 27mm socket
  • 15mm Socket
  • 19mm Socket

  • Sockets - SAE

  • 1/2 Inch Socket

  • Specialty Tools

  • Race Installation Tools

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Brake job complete
Off with the old and on with the new,truck stops much better,thanks to 1A auto parts
October 14, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995-1997Ford Ranger Ford Ranger Rear Wheel Drive Front Brake Kit for Models with Rear Wheel ABS Brakes Semi-Metallic Premium Posi Nakamoto
1995-1997Mazda B2300 Truck Mazda B2300 Truck Rear Wheel Drive Front Brake Kit for Models with Rear Wheel ABS Brakes Semi-Metallic Premium Posi Nakamoto
1995-1997Mazda B3000 Truck Mazda B3000 Truck Rear Wheel Drive Front Brake Kit for Models with Rear Wheel ABS Brakes Semi-Metallic Premium Posi Nakamoto
1995-1997Mazda B4000 Truck Mazda B4000 Truck Rear Wheel Drive Front Brake Kit for Models with Rear Wheel ABS Brakes Semi-Metallic Premium Posi Nakamoto
Part #: 1ABFS00671


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD652, YL5Z1V102AA

How-to Video:

(19:32 min)