1995-96 Toyota Camry Headlight - 1ALHL00536

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


  • LH(Driver Side)
  • Replaces dealer part number: 81150-06032, 8115006032
  • Includes lens, housing, and mounting panel
  • Bulbs not included
Note: This headlight is a direct replacement for U.S built models, however will also fit Japan built models. Japan built models have a slightly different lens.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

    Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : To replace just the headlight bulbs (0:50)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly.
    • Pull aside the rubber boot and unclip the retaining wire.
    • Remove and replace the bulb.
    • Anchor it with the retaining wire and seal it in with the rubber boot.
  2. step : Remove the parking light assembly (1:40)
    • Unscrew the Phillips screw on the top of the assembly
    • Pry it out and unplug the bulb and harness.
    • Set aside.
  3. step : Remove the grille (2:30)
    • Unbolt the two 10 mm bolts securing the grille.
    • Pull the grille off and set aside.
  4. step : Remove headlight (2:45)
    • Remove the four 10mm bolts securing the headlight assembly.
    • Pull the headlight forward and out.
    • Disconnect the bulbs and wiring.
  5. step : Install the new headlight (3:50)
    • Plug in the wiring harness and bulbs.
    • Line up the assembly and bolt back in.
    • Bolt the grille back into place using your socket and ratchet.
  6. step : Install the parking light assembly (4:44)
    • Plug in the bulb and wiring harness.
    • Click the assembly into place and screw the Phillips screw in.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995-1996Toyota Camry Toyota Camry Headlight Driver Side
Part #: 1ALHL00536

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:31 min)