This replacement Toyota Camry corner parking light is just what you need to get your Camry in good looking form again!

Specifications

  • LH (driver's side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts in the fender
  • Does not include bulbs or wiring

This Toyota Camry corner parking lamp is a great replacement and has good cost savings over a parking light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Side Marker Light (0:35)
    • Remove the Phillips screw from the top of the side marker light
    • Loosen the marker light
    • Pry the light forward and out with a flat blade screwdriver, using a cloth rag to protect the paint
    • Disconnect the marker light bulb wiring harness
    • Twist the bulb counterclockwise out of the marker light
    • Pull the bulb out of the socket
  2. step : Installing the New Side Marker Light (1:36)
    • Push the bulb into the socket
    • Connect the bulb to the wiring harness
    • Twist the bulb clockwise into the marker light
    • Push the marker light into place using the locating tabs
    • Insert the Phillips screw into the marker light

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Cloth Rags

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-1996 Toyota Camry Corner Light Driver Side

This part replaces:

  • OE # 8162006020
  • Partslink TO2520139
  • TYC 18-3068-00
  • DEPO 312-1507L-AS
Part #: 1ALPK00150

How-to Video:

(02:48 min)