Replaces

1995-05 Strut & Spring Assembly Rear Pair Monroe Econo-Matic 181281 - MNSSP00149

Why Buy Econo-Matic Strut Assemblies?

Econo-Matic strut assemblies are an economical and easy-to-install alternative. Some of its benefits include:

 

  • Quicker installation time
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Rear Strut (1:11)
    • Pull back the insulation in the trunk and remove the 13mm nut above the strut.
    • Loosen the lug nuts. Raise the vehicle and remove them the rest of the way. Pull the wheel off.
    • Spray penetrating oil on the 19mm bolt on the lower end of the strut.
    • Lift up on the wheel and remove the bolt.
    • Remove the two 10mm bolts at the top of the strut.
    • Pull the strut down and out.
  2. step : Replacing the Rear Strut (2:50)
    • Put the strut up into place and thread the two 10mm bolts.
    • Pull up on the wheel and push the 19mm bolt into place.
    • Make sure the strut is properly in place and tighten the two 10mm bolts. 30ft/lbs.
    • Torque the 19mm bolt to 55ft/lbs.
    • Put the wheel on and replace the lug nuts. Lower the vehicle and tighten the lug nuts in a star patter to 75ft/lbs.
    • Replace the 13mm nut in the trunk.

Tools needed for replacement:

    General Tools

  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:27 min)

Tools List:

    General Tools

  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 10mm Socket



This part replaces:

  • Monroe Econo-Matic 181281

Vehicle Fit

  • 1995-2005 Chevy Cavalier Rear Strut & Spring Assembly Pair Monroe Econo-Matic 181281
  • 1995-2005 Pontiac Sunfire Rear Strut & Spring Assembly Pair Monroe Econo-Matic 181281
Part #: MNSSP00149

Ships Same Day for orders placed by 4 P.M. ET

Monroe Econo-Matic
Brand #: 181281

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More