These axle shafts are just what you need to get your vehicle in good working order!


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • CV Style Axle Shafts
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge
  • Correct for models with or without ABS (Anti-Lock Brakes)
  • Does not include Stub Shaft for Passenger Side
    • Buyer will need to transfer Inner Stub Shaft from the original axle to replacement CV Axle

These CV axle shafts make great replacements and have good cost savings over the dealer parts!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:49)
    • Loosen the lug nut caps with a 19mm socket
    • Pull off the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle (1:15)
    • Apply penetrating oil to the axle nut
    • Remove the hub nut with a 30mm socket and breaker bar
    • Remove the hub nut washer
    • Apply penetrating oil to the axle splines
    • Push the axle out of the hub with a hammer and a block of wood
    • Turn the spindle assembly by hand
    • Apply penetrating oil to the strut assembly nuts
    • Loosen the 21mm nuts from the strut assembly with a breaker bar and pipe for leverage
    • Remove the 21mm nuts with a ratchet
    • Tap the bolts out of the strut assembly with a hammer
    • Pull apart the lower nut and spindle with a pry bar
    • Apply penetrating oil to the brake line bracket bolt
    • Remove the 13mm bolt from the brake line bracket
    • Pull the spindle back and pull the axle out of the hub
    • Pry the axle away from the output housing with a pry bar
    • Pull the axle out by hand
  3. step : Installing the New Axle (4:38)
    • Push the transmission end of the axle in, making sure the clip locks in
    • Push the axle all the way in, and push the hub end into the hub
    • Install the hub nut and washer
    • Preliminarily tighten the hub nut
    • Insert the 13mm bolt into the brake line bracket
    • Line up the spindle with the strut assembly
    • Insert the bolts into the strut assembly
    • Tap the bolts in with a hammer
    • Put the 21mm nuts on to the strut bolts
    • Tighten the 21mm nuts to 100 foot-pounds of torque
  4. step : Reattaching the Wheel (7:32)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to between 145-150 foot-pounds
    • Tighten the lug nuts to 90 foot-pounds in a crossing or star pattern
    • Put the hub cap on, lining up the notch with the valve stem
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Block of Wood

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 30mm Socket
  • 13mm Socket
  • 21mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-2005 Chevy Cavalier Front CV Axle Shaft Pair for Models with 4 Speed Automatic Transmission
  • 1995-2005 Pontiac Sunfire Front CV Axle Shaft Pair for Models with 4 Speed Automatic Transmission
Part #: 1AACS00090

How-to Video:

(08:41 min)