1995-05 Control Arm with Ball Joint Front Pair - 1ASFK00123

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front
  • Location:   Lower

These replacement front lower control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT LOWER
  • Replaces dealer part numbers: 15217436, 22611124, 15217437, 22611125
  • Include new ball joints and bushings
  • Control arms are new, not remanufactured or refurbished

Worn ball joints or loose rear bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front lower control arm with the loose bushings or worn ball joints with our high quality all in one replacement.

One way to diagnose a loose, or warn ball joint on a control arm, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint and bushings for play, if it is moving you probably need to replace it.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the front tire and prepare (0:30)
    • Lubricate all the bolts with penetrating oil
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and the wheel.
  2. step : Remove the control arm (1:15)
    • Unclip the ABS sensor wiring.
    • Remove the stabilizer link.
    • Use a half inch wrench and an adjustable wrench to remove the stabilizer link.
    • Remove the cotter pin on the ball joint bolt.
    • Use an 18 mm wrench to remove the ball joint.
    • Separate the ball joint and control arm from the steering knuckle.
    • Remove the front control arm bolt and the rear control arm bolt.
    • Support the strut with a floor jack.
    • Use a hammer and a pry bar to work out the control arm.
  3. step : Install the new control arm. (3:30)
    • Work the new control arm into place.
    • Use a pry bar and a hammer to get it lined up so you can bolt it in.
    • Get the ball joint into the steering knuckle and lift the control arm up with the floor jack to line things up better.
  4. step : Use a wrench to tighten up the ball joint. (6:40)
    • Put a cotter pin in, making sure it doesn't interfere with the abs sensor ring.
  5. step : Finish reassembly (8:35)
    • Install the brace and stabilizer link.
    • Clip your ABS sensor wiring back in.
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and use a star pattern to torque the lug nuts in accordance with your vehicles specifications.
    • Once everything is assembled, torque to 75-80 foot pounds.
    • Double check your owners manual to double check the specifications on torqueing your suspension bolts for your specific vehicle.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench

4.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
lower control arm
so far the part is work good no problem in the install i would tell other to buy parts from 1a auto THANK YOU
September 24, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995-2005Chevy Cavalier Chevy Cavalier Front Lower Control Arm with Ball Joint Pair for Models with RPO Code FE1 (Soft Ride Suspension)
1995-2005Pontiac Sunfire Pontiac Sunfire Front Lower Control Arm with Ball Joint Pair for Models with RPO Code FE1 (Soft Ride Suspension)
Part #: 1ASFK00123

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:37 min)