This tie rod adjusting sleeve is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.


  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Commonly called "Adjusting Tube"
  • Replaces dealer part numbers: F5AZ-3310-A, F7AZ-3310-AA, F5AZ3310A, F7AZ3310AA
  • Direct replacement
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Part Details

  • Front or Rear Location: Front

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-2002 Ford Crown Victoria Front Tie Rod Adjusting Sleeve
  • 1995-2002 Lincoln Town Car Front Tie Rod Adjusting Sleeve
  • 1995-2002 Mercury Grand Marquis Front Tie Rod Adjusting Sleeve

This part replaces:

  • Moog ES3311S
Part #: 1ASSL00106