WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts using a lug wrench or 19 mm socket and ratchet.
  2. step : Loosen the strut tower brace (1:30)
    • Remove the six 12 mm bolts so that you can move the strut tower brace around and out of your way.
  3. step : Remove the front strut shock (1:55)
    • Remove the brake lines from the strut using your 12 mm socket and ratchet.
    • Remove the 14 mm bolt and 17 mm nut from the strut bracket.
    • Drive the strut out of the bracket using a hammer.
    • Remove the three 14 mm bolts securing the top of the strut.
    • Pull out the strut.
  4. step : Install the new strut (4:10)
    • Put the bracket into place, working it into the bracket.
    • Hand thread the bolts in on the bracket.
    • Torque the bottom 17 mm nut to 65 ft lbs and the 14mm bolt should be torqued to 50ft lbs.
    • Jack up the control arm to alleviate some tension and tighten up the bolts.
    • Bolt the brake lines back on to the strut using your 12 mm socket.
    • Bolt in the top three 14 mm bolts and torque to 45-50 ft lbs.
    • Tighten the strut tower bolts back up.
    • Put the wheel back on, lower the vehicle and torque the lug nuts to 75-85 ft lbs using a star pattern.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 17mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1994-1997Honda Accord Honda Accord Front Strut & Spring Assembly Driver or Passenger Side TRQ SCA57443
1995-1998Honda Odyssey Honda Odyssey Front Strut & Spring Assembly Driver or Passenger Side TRQ SCA57443
1996-1999Isuzu Oasis Isuzu Oasis Front Strut & Spring Assembly Driver or Passenger Side TRQ SCA57443

This part replaces:

  • Monroe 171989
  • Monroe 181989
  • KYB SR4047
  • TRQ SCA57443
Part #: 1ASTS00528


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SCA57443

How-to Video:

(08:45 min)