1994-97 Honda Accord Strut & Spring Assembly - 1ASSP00579

Part Details

  • Quantity: 4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts using a lug wrench or 19 mm socket and ratchet.
  2. step : Loosen the strut tower brace (1:30)
    • Remove the six 12 mm bolts so that you can move the strut tower brace around and out of your way.
  3. step : Remove the front strut shock (1:55)
    • Remove the brake lines from the strut using your 12 mm socket and ratchet.
    • Remove the 14 mm bolt and 17 mm nut from the strut bracket.
    • Drive the strut out of the bracket using a hammer.
    • Remove the three 14 mm bolts securing the top of the strut.
    • Pull out the strut.
  4. step : Install the new strut (4:10)
    • Put the bracket into place, working it into the bracket.
    • Hand thread the bolts in on the bracket.
    • Torque the bottom 17 mm nut to 65 ft lbs and the 14mm bolt should be torqued to 50ft lbs.
    • Jack up the control arm to alleviate some tension and tighten up the bolts.
    • Bolt the brake lines back on to the strut using your 12 mm socket.
    • Bolt in the top three 14 mm bolts and torque to 45-50 ft lbs.
    • Tighten the strut tower bolts back up.
    • Put the wheel back on, lower the vehicle and torque the lug nuts to 75-85 ft lbs using a star pattern.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 17mm Socket
  • 19mm Socket

4.7 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fast shipping
The struts are excellent I installed them by myself to be cleared here I am not a mechanic but with the help of 1a auto videos on YouTube I was able to watch the video and did myself perfect fit with no problem the car is old but it does run a whole lot better now thanks again for the fast shipping . My advice to anyone trying to do this by themselves unless they know what they doing went you done bring it to a shop near you so they can check them for at no cost if there is any issue you can always go back home and fix them that's what I did luckly I did have any issue went it was inspected just to be on the safe side
July 21, 2018
2 months ago
Great Service
On time, no issues of any kind, thank you for your videos great help.

I would recommend to anyone, excellent customer service
June 12, 2018
4 months ago
Perfect Fit
I purchest front and rear struts for my 97 accord they were a perfect fit. The struts had helped fix a little alignment issue and my ride is more comforable now.
March 18, 2018
6 months ago
parts fit perfectly I've ordered from them before and I will order again!!Write
November 22, 2017
10 months ago
1996 accord strut assemblies
The parts arrived sooner than estimated and the install was a breeze. The car rides like new again and it actually raised the ride height 1 inch. I will deffenitly be ordering parts again if needed for future repairs.
March 19, 2017
1 year ago
1994 Honda Accord
The brake lines don't re attach correctly on these on the front struts and the back ones are really twisted and hard to get lined up to re attach at the bottom. Other then that they seem to do the job.
February 27, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
How low do these leave a car ?
Oscar S on Mar 2, 2017
BEST ANSWER: It puts the car at the stock height. Due to the age of the vehicle, if you are replacing factory struts it will most likely raise the height a touch compared to where it sits right now.

Vehicle Fit

Year Make Model Description
1994-1997Honda Accord Honda Accord Front & Rear Strut & Spring Assembly 4 Piece Set

This part replaces:

  • Monroe 181989
  • Monroe 181286L
  • Monroe 181286R
  • Monroe 171989
  • Monroe 171286L
  • Monroe 171286R
  • KYB SR4047
  • KYB SR4050
  • KYB SR4049
Part #: 1ASSP00579

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:45 min)