Replaces

Strut & Spring Assembly Pair TRQ SCA56973 - 1ASSP00028

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts using a lug wrench or 19 mm socket and ratchet.
  2. step : Loosen the strut tower brace (1:30)
    • Remove the six 12 mm bolts so that you can move the strut tower brace around and out of your way.
  3. step : Remove the front strut shock (1:55)
    • Remove the brake lines from the strut using your 12 mm socket and ratchet.
    • Remove the 14 mm bolt and 17 mm nut from the strut bracket.
    • Drive the strut out of the bracket using a hammer.
    • Remove the three 14 mm bolts securing the top of the strut.
    • Pull out the strut.
  4. step : Install the new strut (4:10)
    • Put the bracket into place, working it into the bracket.
    • Hand thread the bolts in on the bracket.
    • Torque the bottom 17 mm nut to 65 ft lbs and the 14mm bolt should be torqued to 50ft lbs.
    • Jack up the control arm to alleviate some tension and tighten up the bolts.
    • Bolt the brake lines back on to the strut using your 12 mm socket.
    • Bolt in the top three 14 mm bolts and torque to 45-50 ft lbs.
    • Tighten the strut tower bolts back up.
    • Put the wheel back on, lower the vehicle and torque the lug nuts to 75-85 ft lbs using a star pattern.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 17mm Socket
  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How good are these? For the price Im skeptical if they are worth buying. Or will they break in 500 miles
Tanner W September 23, 2015
I have put several thousand miles on mine and theyre holding up fine. No complaints
Jeff P September 24, 2015
I purchased and installed them on my sons Honda and have had no issues with them. In fact 3 months later we drove the car from Washington to Southern California for his school and still no issues. I was skeptical of them as well but Id buy them again. Plus the install videos were A help too.
Michael B September 24, 2015
Hello, I havent had any problems with these. They were the cheapest I could find and they turned out ok. I use my car for in-town driving so I didnt need anything heavy duty. Although I did go on an 1500mi trip round trip after I replaced the part. No complaints about the product or the service. Im sure they will last for more than 500mi for you.
Daniel N September 24, 2015
Zero problems. Installed nearly 16000 miles ago. Great Value.
Allen W September 24, 2015
I Bought these parts for my Honda about six months ago and theyre doing just fine. Theyre already assembled which was great all we had to do was install them. When the auto part store was asking the same price for just the struts by themselves. I am very happy with them.
Rachael S September 27, 2015
What is the brand name of the strut for the 1995? honda accord 6 cylinder??
Fred S August 16, 2017
Im sorry it has been a while and I dont remember. I will say they were an exact for and performed well for us.
Terry M August 16, 2017
These are our 1A Auto brand parts. We use multiple vendors based in either Taiwan or China to make the parts and we back them with a limited lifetime warranty.
Alex P August 16, 2017
I do not know the brand name that was quite some time ago. They seem to be well made and went on nicely. I have no complaint on these struts.
Edwin N August 17, 2017
Year Make Model Description
1994-1997Honda Accord Honda Accord Front Strut & Spring Assembly Pair TRQ SCA56973
1995-1998Honda Odyssey Honda Odyssey Front Strut & Spring Assembly Pair TRQ SCA56973
1996-1999Isuzu Oasis Isuzu Oasis Front Strut & Spring Assembly Pair TRQ SCA56973
Part #: 1ASSP00028


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SCA56973

How-to Video:

(08:45 min)