Replaces

1994-97 Honda Accord Radiator Cooling Fan Assembly - 1ARFA00250

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our aftermarket radiator fan assemblies are some of the highest quality replacements on the market! This radiator cooling fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications:

  • New, not rebuilt, electric motors
  • SINGLE FAN
  • Replaces dealer part numbers: 19015P0GA01, 19015-P0G-A01, 19020P1E003, 19020-P1E-003, 19030PT0003, 19030-PT0-003
  • Geometrically designed plastic blade for optimal circulation and uniform balance
  • Shroud designed to ensure structural integrity and endurance for maximum performance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug(s) for trouble free installation
  • Does not fit 4 Cylinder models

Now you can buy a high quality radiator cooling fan motor assembly that is built to strict quality control standards. This cooling motor assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Diagnose the problem (0:50)
    • If the AC fan doesn't turn on when the car is on and the AC is running,
    • Check the AC fan fuse.
    • If the circuit is fine, then the fan could be burnt out.
    • If the fuse keeps blowing then your fan is shorting out.
  2. step : Disconnect the battery (2:00)
    • Use an 8 mm wrench to disconnect the negative battery terminal
  3. step : Remove the plastic skid plate (2:15)
    • Remove the seven 10 mm bolts and the push clips.
    • To remove the push clips, pry up the center with a flat blade screwdriver and that will release the body of the pin.
  4. step : Remove the Radiator Fan (3:16)
    • Unbolt the 10 mm bolt using your socket and ratchet anchoring the radiator fan.
    • Unclip the wiring harness connection to the radiator fan.
    • Unbolt the four bolts anchoring the radiator.
    • Remove the radiator fan, using the play in the radiator to work the fan out of the engine bay.
  5. step : Install the new radiator fan (5:35)
    • Finesse the radiator fan down in to place
    • Plug in the fan to the wiring harness
    • Hand tighten the 10 mm bolt to the radiator.
    • Put the radiator back into place and bolt in the four bolts mounting the radiator.
    • Tighten the radiator fan bolt.
  6. step : Re-install the skid plate (8:20)
    • Bolt in the seven 10 mm bolts
    • Replace the push clips
    • Push the clip in and press down the middle to secure the push clip.
  7. step : Reconnect the battery (8:53)
    • Reconnect the negative battery terminal

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 8mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
1A Auto got it right!
I tried to order this radiator cooling fan through two local parts stores then through the dealer, and no one local could help me. I found this part online, and called to talk to a representative about the part and the return policy if it was not exactly what I needed. I was thrilled that after looking for 3+ weeks for this part it was delivered quickly and was exactly what I needed. Thank you so much, A1Auto!!
August 22, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-1997Honda Accord Honda Accord Radiator Cooling Fan Assembly V6 2.7L
Part #: 1ARFA00250


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:21 min)