Specifications:
  • Right Hand (Passenger Side)
  • Includes lens, housing, and mounting panel
  • Includes integrated parking/marker lamp
  • Bulbs not included.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Remove front bumper cover (1:18)
    • Remove the front grill by removing five 8mm bolts.
    • Use a screwdriver to depress the tab and unclip the front grill.
    • Remove the grill and set aside.
    • Remove the Phillips screw above the parking light.
    • Pull the parking light to the side to access the Phillips push clips on the bumper.
    • Remove the bolts underneath the wheel well and under the bumper.
    • Unplug your parking lights and set them aside.
    • Pull the bumper cover off, starting at the sides.
    • Unplug the signal lights.
    • Remove the Styrofoam filler.
  2. step : Remove headlight (5:27)
    • Remove the four T40 screws to remove the impact absorber.
    • Remove the four bolts securing the assembly.
    • Unplug/remove the bulbs.
    • Use a screwdriver to unclip the wiring from the headlight.
  3. step : Install headlight (7:00)
    • Switch the grill clip to the new headlight assembly.
    • Put the bulbs back in and plug them in.
    • DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clip the wiring back to the headlight.
    • Tighten your bolts back in to 5 or 10 ft lbs.
    • Replace the impact absorber with your T40 Torx bit.
  4. step : Replace bumper cover (11:10)
    • Replace the bolts and push clips.
    • Clip and bolt the front grill back in.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T40 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1994-1997Honda Accord Honda Accord Headlight Passenger Side

This part replaces:

  • Partslink HO2503106
  • Hollander 114-58374R
  • TYC 20-1844-00-1
  • DEPO 317-1106R-AFC
  • OE # 33100SV4A02
Part #: 1ALHL00501


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:53 min)