Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This is a front door power window regulator with motor.

Specifications

  • LH (Driver Side)
  • Direct replacement
  • Fits 2 door coupe models only
  • Motor and regulator come assembled for easier installation

Assembly includes regulator and motor as shown.

Dealer List ~ $306.00

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:56)
    • Remove the sail panel behind the mirror
    • Pry up the door latch bezel with a flat blade screwdriver.
    • Use a Phillips screwdriver to remove the five screws
    • Press the push pins in on the edges and bottom of the door panel and pry it out
    • On the edges of the door panel, remove the push clips by depressing the center and pulling the body of the clip out.
    • Pry up the window switch panel
    • Unplug the switch panel from the wiring harness
    • Pull the door panel off, lifting it up over the lock and door latch
  2. step : Removing the Window Regulator (4:32)
    • Peel back the water shield
    • Disconnect the window motor lead
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the three 10mm bolts from the regulator
    • Remove the three 10mm bolts from the window motor
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (7:50)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the two 10mm bolts into the regulator
    • Insert the three 10mm bolts into the window motor
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Installing the Door Panel (9:38)
    • Thread the wiring harness through the switch panel hole
    • Clip the door panel on, securing with the push clips
    • Depress the body of the clip and push in the center to anchor them on the sides and bottom
    • Screw in the five Phillips screws in the door pull
    • Reconnect the wiring harness to the switch panel
    • Clip the switch panel and the door latch bezel back on
    • Press the sail panel on

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

3.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
1
Great DIY Video
I bought the part based on the great video showing how to install my part. Good price and fast shipping and no back orders like other online sellers. Thanks!
September 17, 2018
NOT same size as original so had to cut so would fit
The metal track was longer than the original so it was impossible to get the part into the door. The part was too big because the metal track stuck out past the pulley about 3/4 inch too long at an angle. It took me a long time to figure out what to do. I realized my only choice was to cut the parts metal track where it protruded past the pulley. I tried using a hacksaw but it was too much work and a clean cut wasnt necessary. So I snipped it to proper size with a bolt cutter. Then the part fit ok. The window opener has been working ok. But you have to properly grease it yourself before you finish installing it. I bolted the part in place and then connected the motor to the switch while the door panel was still off so I could make the window go up and down and I could apply grease to the cable and pulley completely while the cable moved moved. I applied grease at all ends of the cable housing and on the motor spindle.
September 24, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-1996Toyota Camry Toyota Camry 2 Door Coupe Power Window Regulator with Motor Driver Side
Part #: 1AWRG00100


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:17 min)