Replaces

1994-95 Honda Accord Lift Support - 1ABHS00116

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Is your trunk lid not staying open anymore? The problem could be the lift supports mounted from the quarter panels to the trunk. These get weak over time and require replacing. No need to lose money at the dealer for this simple do it yourself replacement. Our lift supports are just what you need to allow your trunk lid to stay open again!

Each trunk lid strut has the following specifications:

  • Fits either the LH (driver) or RH (passenger) side
  • Replaces dealer part numbers: 74820-SV4-013, 74820SV4013
  • 100% tested prior to leaving the factory
  • Gas-Charged
  • Built to strict quality control standards
  • Commonly called "Support Stay" by Honda
  • Does not fit Station Wagon Models

This is for one support. We recommend replacing them in pairs.

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the trunk strut (0:55)
    • Use a 10 mm wrench or socket and ratchet to remove the bolt at the top of the support strut.
    • Pull the cover off the bottom end of the strut.
    • Pry off the now exposed clip with your pliers.
    • Pull the strut off.
  2. step : install the new trunk strut (2:20)
    • Put the strut into place.
    • Thread the 10 mm nut onto the top end.
    • Replace the clip on the bottom.
    • Clip the cover onto the bottom end.
    • Tighten the 10 mm nut up.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-1995Honda Accord Honda Accord Trunk Lift Support (excluding Wagon)
Part #: 1ABHS00116


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:31 min)