Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

Specifications:

  • RH (Passenger Side) FRONT
  • Power window regulator
  • Includes power window motor
  • Replaces dealer part numbers: 1R3Z6323208AB, 3R3Z6323200AA, 1R3Z-6323208-AB, 3R3Z-6323200-AA
  • Built to strict quality control standards

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:35)
    • Carefully pry and remove the clip on the inside edge of the door panel.
    • Insert a flat blade screwdriver into the notch at the top of the switch panel and carefully pry the top part of the panel out.
    • Then pry the bottom part of the same panel and left out.
    • Use a Phillips screw driver to disconnect the switch from the panel.
    • Remove the screws (or pin) from the panel.
    • Pry the bottom of the door handle. Then the top and pull it free.
    • Pry the panel by the mirror free.
    • Lift the door panel up and off.
    • Remove the water shield carefully to avoid ripping it.
  2. step : Preparing the New Regulator (4:32)
    • Bend the track indentations with a screw driver to free the track.
    • Slide the track off.
  3. step : Removing the Old Regulator (6:20)
    • Disconnect the window motor wires and pull it away from the door and push the wires into the hole.
    • Remove the 11mm nuts and bolts on the door to detach the regulator.
    • Pry off the weather strip on the top of the door.
    • Push the studs and lift up the regulator by pulling the window up.
    • Place a piece of wood underneath the regulator to hold it in place.
    • Bend the tabs on the window track using a pair of pliers.
    • Have an assistant hold the window and remove the wood.
    • Have them lift the window keeping it level to avoid it coming out of its track.
    • Slide the track out and pull it towards the inside of the door.
    • Lift the window more and move the arm of the regulator around to the opposite side.
    • Pull the regulator from the door.
  4. step : Installing the New Regulator (10:12)
    • Turn the arm away from the motor when inserting it into the door.
    • Feed the harness through.
    • Swing the arm back and connect it.
    • Connect the other arm
    • Lower the window onto it and push the stud through.
    • Tighten the nuts. And insert the bolts.
    • Slide the track on.
    • Connect the wire harness an test the window before replacing the door panel.
  5. step : Connecting the Door Panel (14:14)
    • Replace the water shield and weather strip.
    • Line up the lower tabs on the door panel with the slots on the door and lift the door panel up and over the lock.
    • Pull the harness through.
    • Push the door panel down into place.
    • Snap the mirror panel into place.
    • Replace the door panel screws (or pins).
    • Replace screws in the switch panel.
    • Snap the panel back into place.
    • Fit the door handle into place.
    • Reinsert the pin on the inside edge of the door panel.

Tools needed for replacement:

    General Tools

  • Assistant

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket

4.88/ 5.0
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
1
0
0
0
Buy this item
When I needed to replace the regulator on my 95 GT, I did what most people do, check youtube. After finding the video from 1A showing how easy it is I ordered up the part. On my car the old regulator was riveted in and I needed to do a quick drill and knock them out. Installed the new regulator from 1A with bolts and washers and my window works like new. Great parts and great people, look nowhere else.
June 19, 2017
Great part and great how to video
Great video on hot to get door apart and replace part, good camera work. Part installed with little problems expect my 1994 Cobra had four rivets instead of bolts. Motor seems a little weaker than Ford version but still works good. Loved the price!
August 19, 2017
Great window regulator, and even better video.
1A Auto has knocked this one out of the park. I received my window regulator super quick. Their install videos on YouTube brought me here. Those videos are very helpful in making this repair easy. My wife was super excited with glass cutters, when I serviced her vehicle and car. Thanks to 1A Auto, she can break whatever she wants and Hail to this King.
March 16, 2018
Works well enough
Went to 1A auto because they were far less expensive than locally. I probably went the hard way with regard to installing it however.
April 23, 2018
Ford Mustang Window Regulator
It came so quickly and it fit great. After watching the video it made my job easy. Thank guy will buy again.
August 18, 2018
Appears to be well made
havent installed it yet, but appears well made. Metal seems to be a little thinner than OEM, but Im sure it will work just fine. But you cant beat the price, especially with a new motor as well.
September 26, 2018
Great company
Product works well. Will use a1 auto again and again.
October 7, 2018
Regulater Installation// 02 Mustang Coupe
The How To videos were extremely helpful The only problem I had was that the window was in the full up position. I solved the problem by removing the old motor assembly. After that it was easy to R/R the regulator. The only other trouble I had was reinstalling the Plastic Door Panel. (Not Ford Friendly) The other parts I ordered were simple and the How To video made it quick and easy.
November 9, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-2004Ford Mustang Ford Mustang Front Power Window Regulator with Motor Passenger Side
Part #: 1AWRG01275


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(17:37 min)