Replaces

1994 Ford Mustang Front Power Window Regulator with Motor Pair

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Quantity:   Pair
  • Operation:   Power

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Power window regulators
  • Includes power window motors
  • Replaces dealer part numbers: 3R3Z6323201AA, 1R3Z6323209AA, 3R3Z-6323201-AA, 1R3Z-6323209-AA, 1R3Z6323208AB, 3R3Z6323200AA, 1R3Z-6323208-AB, 3R3Z-6323200-AA
  • Built to strict quality control standards

 

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:35)
    • Carefully pry and remove the clip on the inside edge of the door panel.
    • Insert a flat blade screwdriver into the notch at the top of the switch panel and carefully pry the top part of the panel out.
    • Then pry the bottom part of the same panel and left out.
    • Use a Phillips screw driver to disconnect the switch from the panel.
    • Remove the screws (or pin) from the panel.
    • Pry the bottom of the door handle. Then the top and pull it free.
    • Pry the panel by the mirror free.
    • Lift the door panel up and off.
    • Remove the water shield carefully to avoid ripping it.
  2. step : Preparing the New Regulator (4:32)
    • Bend the track indentations with a screw driver to free the track.
    • Slide the track off.
  3. step : Removing the Old Regulator (6:20)
    • Disconnect the window motor wires and pull it away from the door and push the wires into the hole.
    • Remove the 11mm nuts and bolts on the door to detach the regulator.
    • Pry off the weather strip on the top of the door.
    • Push the studs and lift up the regulator by pulling the window up.
    • Place a piece of wood underneath the regulator to hold it in place.
    • Bend the tabs on the window track using a pair of pliers.
    • Have an assistant hold the window and remove the wood.
    • Have them lift the window keeping it level to avoid it coming out of its track.
    • Slide the track out and pull it towards the inside of the door.
    • Lift the window more and move the arm of the regulator around to the opposite side.
    • Pull the regulator from the door.
  4. step : Installing the New Regulator (10:12)
    • Turn the arm away from the motor when inserting it into the door.
    • Feed the harness through.
    • Swing the arm back and connect it.
    • Connect the other arm
    • Lower the window onto it and push the stud through.
    • Tighten the nuts. And insert the bolts.
    • Slide the track on.
    • Connect the wire harness an test the window before replacing the door panel.
  5. step : Connecting the Door Panel (14:14)
    • Replace the water shield and weather strip.
    • Line up the lower tabs on the door panel with the slots on the door and lift the door panel up and over the lock.
    • Pull the harness through.
    • Push the door panel down into place.
    • Snap the mirror panel into place.
    • Replace the door panel screws (or pins).
    • Replace screws in the switch panel.
    • Snap the panel back into place.
    • Fit the door handle into place.
    • Reinsert the pin on the inside edge of the door panel.

Tools needed for replacement:

    General Tools

  • Assistant

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Product works as expected ... excellent 1A Auto video
The part works as it should. I purchased at 1A Auto because I saw the change process on a 1A Auto video and the link to the part navigated to the right part. The video was excellent. (Be sure to wear long sleeves.) Competitive price as well.
July 22, 2018
working electric windows
It was nice to find these window regulators if I had known these existed years ago I would have fixed these electric windows sooner!
December 29, 2018
Mustang window motors
I love these the only downside was that my 1994 Mustang window regulator/motor were riveted in so it took a little longer. First tried to drill them out then had to go out and buy a tool that broke to grind off the rivets (then borrowed one) the part works great. Next week I’ll tackle the drivers side one.
March 23, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-2004Ford Mustang Ford Mustang Front Power Window Regulator with Motor Pair
Part 1AWRK00230
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: WRA50291
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.