1994-04 Ford Mustang Interior Door Handle Pair - 1ADHS00369

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

These inside door handles are just what you need to get your vehicle in good working order again!


  • Come as a PAIR
    • Fit both the LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: XR3Z-6321819-AAC, XR3Z6321819AAC, XR3Z-6321818-AAC, XR3Z6321818AAC
  • Black plastic
  • Direct replacements for original handles
  • Built to strict quality control standards

These door handles are direct bolt ons and are built to strict quality control standards. They are great replacements and have substantial cost savings over dealer units.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:29)
    • Disconnect the negative battery cable with an 8mm wrench
    • Removing the Door Panel
  2. step : Removing the Door Panel (0:37)
    • Pry the plastic clip out of the front edge of the door panel with a flat blade screwdriver
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses with a Phillips head screwdriver
    • Pull the window switch panel off the switch
    • Remove the two Phillips screws from behind the window switch panel
    • Pry off the door handle bezel with a flat blade screwdriver
    • Pry off the mirror base trim piece with a flat blade screwdriver
    • Lift the door panel up and off
  3. step : Removing the Door Handle (2:56)
    • Punch the center out of the door handle rivet with a hammer and punch
    • Carefully drill out the rivet
    • Pry the door handle out with a flat blade screwdriver
    • Disconnect the latch cable from the door handle
    • Wear the rivet down with the drill
    • Push the rivet through with the hammer and punch
  4. step : Installing the Door Handle (4:38)
    • Peel back the water shield
    • Connect the latch cable to the door handle
    • Put the door handle into place
    • Insert a coarse threaded bolt to replace the rivet
    • Tighten the bolt
  5. step : Installing the Door Panel (6:22)
    • Put the water shield into place
    • Put the door panel into place using the locating tabs
    • Push the door panel down in
    • Push on the mirror base trim piece
    • Insert the two Phillips screws behind the window switch
    • Push the window switch into the switch panel
    • Connect the window switch wiring harnesses with a Phillips screwdriver
    • Push on the door handle bezel
  6. step : Connecting the Battery (9:28)
    • Connect the negative battery cable with an 8mm wrench

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • General Tools

  • Pick
  • Hammer

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-2004Ford Mustang Ford Mustang Black Interior Door Handle Pair
Part #: 1ADHS00369

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:43 min)