Replaces

1994-04 Ford Mustang Heater Blower Motor with Fan Cage - 1AHCX00105

This Ford Mustang blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 1R3Z 19805 BA, F4ZZ 19834 A, 2R3Z 19805 BA, MM942, 1R3Z19805BA, F4ZZ19834A, 2R3Z19805BA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Blower Motor (0:29)
    • Unclip the blower motor wiring harness from the blower motor cover
    • Remove the three 8mm bolts from the blower motor
    • Pull down the blower motor
    • Pull off the blower motor cover
    • Disconnect the blower motor wiring harness
  2. step : Installing the Blower Motor (1:32)
    • Connect the blower motor wiring harness
    • Put the cover on the blower motor
    • Lift the blower motor into place
    • Insert the three 8mm bolts into the blower motor
    • Clip the wiring harness to the blower motor cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:28 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket



This part replaces:

  • OE # F4ZZ 19834 A
  • OE # 1R3Z 19805 BA
  • Partslink FO3126114
  • Hollander 615-00548*
  • TYC 700016
  • DEPO 330-58004-000

Vehicle Fit

  • 1994-2004 Ford Mustang Heater Blower Motor with Fan Cage
Part #: 1AHCX00105

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More