Replaces

1994-02 Ford Mustang Steering & Suspension Kit - 1ASFK02879

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Steering Rack & Pinion Bellows
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Built to strict quality control standards
  • Direct replacements

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove Wheel (2:25)
    • Remove lug nuts and remove wheel.
  2. step : Remove tie rod (2:37)
    • Remove cotter pin.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Install new tie rod (5:30)
    • Use the old nut to mark the bolt with tape.
    • Use a vice grip and an adjustable wrench to remove the nut, using penetrating oil if need be.
    • Replace bolt with new one, compensating for any difference in width.
    • Use your two adjustable wrenches to tighten the nut up against the tie rod end.
    • Use your torque wrench to tighten up the nut on the end of the tie rod and put the cotter pin in.
    • Put the grease fitting in.
    • Use grease gun to fill boot with grease.
  4. step : Put wheel back on (9:48)
    • Use the star pattern to tighten the lugs to 90 to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller
  • Vise-Grips

  • Wrenches - Metric

  • 8mm Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Good parts no issues installing
Good parts at an affordable price. Very smooth ride for 7 bucks a part
April 13, 2018
the kit works perfectly fine for me...my car rides so much better
November 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this fit my 2003 mustang gt?
Katon L July 9, 2017
No, this kit will not fit on your 2003 Ford Mustang GT.
Tim K July 9, 2017
Year Make Model Description
1994-2002Ford Mustang Ford Mustang 10 Piece Set Steering & Suspension Kit
Part #: 1ASFK02879


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:21 min)