Replaces
Replaces Infiniti G25 G35 G37 Q40 Driver & Passenger Side Outer 2 Piece Performance Tail Light Set DEPO 325-1901FXAS-C
$264.95
Replaces 2002-06 Dodge Ram 1500 2500 3500 Driver & Passenger Side 2 Piece Tail Light Set DIY Solutions LHT07409
$73.95
Replaces 2006-09 Ford Fusion Driver & Passenger Side Outer 2 Piece Tail Light Set DEPO 1ALTP01444
$137.95
Replaces Chevrolet GMC Cadillac Driver & Passenger Side Tail Light Circuit Board 2 Piece Set DIY Solutions LHT07274
$30.95
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video, I am going to show you how to replace a tail light on this 1998 Dodge Ram, the same as any 94 to 01. The only tool you will need is a T25 Torx bit with a ratchet and extension or a driver. So, if you open there are two T25 Torx screws. That's probably the hardest part about this; knowing what tool to use. So your taillight pulls out. Then, if you're just looking to change a bulb, just twist these off. Twist these off. If you're looking to change your taillight assembly, new ones from 1A Auto. The bulbs pull right out. Push back in.
Reassembly is just a reversal of the procedure. There are pins back here that line up with holes in the cork panel. Make sure you line everything up. Push it on. Reinstall your screws.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
