Specifications:

  • Brand New Lighting Kit
  • Comes as a 2 Piece Kit
    • Fits LH (Driver Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Handling the Bulbs (1:23)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace just the headlight bulbs (1:27)
    • Pop the hood and secure it.
    • Reach behind the head light assembly and remove the bulb.
    • Reverse the process to install.
  3. step : Remove the grille (3:08)
    • Remove the six Phillips screws
    • Pull the grille off.
  4. step : Remove the parking light assembly (3:55)
    • Remove the 11 mm nut to pull out the parking light assembly.
    • Unclip the parking light assembly
    • Unplug the wiring harness and bulb
  5. step : Remove the headlight assembly (4:55)
    • Pull up the tabs anchoring the head light assembly
    • Pull out the head light assembly
    • Disconnect the wiring harness.
  6. step : Aim the headlights (6:05)
    • Adjust the adjustor screws to match the old headlight using a Phillip's screwdriver
  7. step : Install the new headlight assembly (7:10)
    • Plug in bulbs and harness
    • Clip into place
    • Bolt in using your 11mm socket and ratchet
  8. step : Install the grille (9:55)
    • Put it into place
    • Secure with the six Phillips screws and Phillips screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Ford Ranger 2 Piece Set Lighting Kit Driver Side

This part replaces:

  • TYC 20-1973-00-1
  • TYC 18-3025-01
  • Hollander 114-232L
  • Hollander 116-894L
  • OE # F37Z 13008 B
  • OE # F37Z 13201 A
  • Partslink FO2502119
  • Partslink FO2520118
Part #: 1ALHT00073



How-to Video:

(12:04 min)