Specifications:

  • RH (Passenger Side)
  • Replaces dealer part number: F37Z-13008-A, F37Z13008A
  • Includes lens, housing, and adjusting screws
  • Bulbs not included
  • Direct replacement
  • Built to strict quality control standards
This headlight is a great replacement and has good cost savings over a headlight from the dealer.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Handling the Bulbs (1:23)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace just the headlight bulbs (1:27)
    • Pop the hood and secure it.
    • Reach behind the head light assembly and remove the bulb.
    • Reverse the process to install.
  3. step : Remove the grille (3:08)
    • Remove the six Phillips screws
    • Pull the grille off.
  4. step : Remove the parking light assembly (3:55)
    • Remove the 11 mm nut to pull out the parking light assembly.
    • Unclip the parking light assembly
    • Unplug the wiring harness and bulb
  5. step : Remove the headlight assembly (4:55)
    • Pull up the tabs anchoring the head light assembly
    • Pull out the head light assembly
    • Disconnect the wiring harness.
  6. step : Aim the headlights (6:05)
    • Adjust the adjustor screws to match the old headlight using a Phillip's screwdriver
  7. step : Install the new headlight assembly (7:10)
    • Plug in bulbs and harness
    • Clip into place
    • Bolt in using your 11mm socket and ratchet
  8. step : Install the grille (9:55)
    • Put it into place
    • Secure with the six Phillips screws and Phillips screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

4.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
0
0
Fine, but leaky
This replaced a light previously bought from 1aauto. That one accumulated half an inch of water inside the bottom of the lens. Tried to seal the new one before installation. Hope it works. Mate on driver's side leaks just a little, but does have moisture inside.
March 18, 2018
Purchased
4 months ago
Headlight fit perfectly. Video was great. Followed it exactly and had no trouble installing it.
September 27, 2017
Purchased
10 months ago
Makes my Truck look brand new!
Install went easily after watching the provided video. Cant believe what a difference it made to the appearance and the improved night time visibility.
March 7, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Ford Ranger Headlight Passenger Side

This part replaces:

  • Partslink FO2503115
  • Hollander 114-232R
  • OE # F37Z 13008 A
  • TYC 20-1972-00-1
  • DEPO 331-1113R-AS
Part #: 1ALHL00313

How-to Video:

(12:04 min)