This replacement parking light is just what you need to get your truck in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Replaces dealer part number: F37Z-13200-B, F37Z13200B
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts next to the headlight
  • Does not include bulbs or wiring

This parking lamp is a great replacement and has good cost savings over a parking light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Handling the Bulbs (1:23)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace just the headlight bulbs (1:27)
    • Pop the hood and secure it.
    • Reach behind the head light assembly and remove the bulb.
    • Reverse the process to install.
  3. step : Remove the grille (3:08)
    • Remove the six Phillips screws
    • Pull the grille off.
  4. step : Remove the parking light assembly (3:55)
    • Remove the 11 mm nut to pull out the parking light assembly.
    • Unclip the parking light assembly
    • Unplug the wiring harness and bulb
  5. step : Remove the headlight assembly (4:55)
    • Pull up the tabs anchoring the head light assembly
    • Pull out the head light assembly
    • Disconnect the wiring harness.
  6. step : Aim the headlights (6:05)
    • Adjust the adjustor screws to match the old headlight using a Phillip's screwdriver
  7. step : Install the new headlight assembly (7:10)
    • Plug in bulbs and harness
    • Clip into place
    • Bolt in using your 11mm socket and ratchet
  8. step : Install the grille (9:55)
    • Put it into place
    • Secure with the six Phillips screws and Phillips screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Ford Ranger Corner Light Passenger Side

This part replaces:

  • Partslink FO2521116
  • Hollander 116-894R
  • OE # F37Z 13200 B
  • TYC 18-3024-01
  • DEPO 331-1518R-US
Part #: 1ALPK00071

How-to Video:

(12:04 min)