1993-95 Toyota Corolla Tail Light Driver Side - 1ALTL00275

This replacement tail light is just what you need to get your Toyota Corolla in good looking form again!

This Toyota tail light features the following specifications:

  • LH (driver's side)
  • Yellow Turn Indicator
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Toyota Corolla tail light makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight (0:26)
    • Remove the trim panel clips and pull off the trim panel.
    • Push the clip on the harness out.
    • Disconnect the harness.
    • Remove the 10mm nut and the two 10mm bolts.
    • Pull the taillight assembly back and out.
  2. step : Changing a Bulb (1:40)
    • Twist the sockets out.
    • Pull the bulb out.
    • Push a new bulb in.
    • Twist the socket back in.
  3. step : Replacing the Taillight (2:09)
    • Pinch the clips to release the trim panel from the taillight.
    • Push the trim panel onto the taillight.
    • Run the harness through the car.
    • Line up the taillight and press it into place.
    • Replace the two bolts and the nut to secure the taillight.
    • Reconnect the harness and push it back into place.
    • Replace the trim panel and clips.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:10 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

This part replaces:

  • Partslink TO2800106
  • Hollander 166-58628L
  • OE # 815601A790
  • TYC 11-1801-00
  • DEPO 312-1904L-AS

Vehicle Fit

  • 1993-1995 Toyota Corolla Sedan Tail Light Driver Side
Part #: 1ALTL00275

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More