Replaces

1993-95 Jeep Grand Cherokee Grille, Header Panel & Light Set - 1ABGK00027

This replacement grille kit is just what you need to get your vehicle in good looking form again!

Specifications:

  • FRONT Steering Kit includes:
    • (1) - Black (Paint To Match) Grille
    • (1) - Header Panel (without leveling device)
    • (2) - Headlights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Side Marker Lights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Park/Signal Lights - LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 5DF54MX8, 56005099, 56005098, 56005104, 56005105, 55055118AB, 55055119AB, 55054886
  • Park/Signal Lights fit models with 2-tab socket
    • Sockets and bulbs are not included
  • Direct replacements
  • Built to strict quality control standards

This grille kit makes a great replacement and has good cost savings over dealer parts.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Handling the Bulbs (0:35)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Removing the side marker light (1:05)
    • Use your No. 2 Torx screwdriver to remove the screws securing the side marker light.
    • Pull the headlight out.
    • Unplug the harness.
    • Clean the studs the headlight assembly with a wire brush.
    • Spray with penetrating oil.
  3. step : Installing the new headlight assembly (3:00)
    • Plug in the harness.
    • Clip the new headlight back into place.
    • Screw the side marker light assembly back into place with your No. 2 Torx screwdriver.

Tools needed for replacement:

    General Tools

  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Torx Drivers & Sockets

  • Number 2 Torx driver

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
2
0
0
0
front grill & header parts.
All the parts look as good as if they'd came from Mo-par. But the header doesn't have the Pivot pins & the leveling devises. & I can't find them . So I still don't have my front end install completely.
February 3, 2017
Purchased
1 year ago
Haven't installed it yet but the service and delivery was very prompt.
August 21, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 6 answers
does this coma assembled ? the adjustment gears are difficult to install, I'm looking for a complete ready to install unit
Richard L on Sep 19, 2016
BEST ANSWER: This will come as full assemblies, but separate assemblies. The headlights will have to be aimed when you install them.

How-to Video:

(05:08 min)

Tools List:

    General Tools

  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Torx Drivers & Sockets

  • Number 2 Torx driver




Vehicle Fit

  • 1993-1995 Jeep Grand Cherokee Black Smooth - Paint to Match Grille, Header Panel & Light Set
Part #: 1ABGK00027

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More