Replaces

1993-94 Ford Ranger Grille, Headlights & Corner Lights Kit - 1ABGK00029

This replacement grille kit is just what you need to get your vehicle in good looking form again!

Specifications:

  • FRONT Grill (Grille) & Light Kit includes:
    • (1) - Grill (Grille)
    • (2) - Headlights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Parking Lights - LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: F37Z-8200-AA, F37Z-13008-A, F37Z-13008-B, F37Z-13201-A, F37Z-13200-B, F37Z8200AA, F37Z13008A, F37Z13008B, F37Z13201A, F37Z13200B
  • Grille (Grille) is BLACK in color
    • Can be painted by the buyer or installed as is
    • Has proper area for the Ford emblem (not included)
    • Does not have the "4x4" indentation that some original Ranger models may show
  • Sockets and bulbs are not included
  • Direct replacements
  • Built to strict quality control standards
  • Correct for 4WD (4x4) Models

This grill & light kit makes a great replacement and has good cost savings over dealer parts.

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Handling the Bulbs (1:23)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace just the headlight bulbs (1:27)
    • Pop the hood and secure it.
    • Reach behind the head light assembly and remove the bulb.
    • Reverse the process to install.
  3. step : Remove the grille (3:08)
    • Remove the six Phillips screws
    • Pull the grille off.
  4. step : Remove the parking light assembly (3:55)
    • Remove the 11 mm nut to pull out the parking light assembly.
    • Unclip the parking light assembly
    • Unplug the wiring harness and bulb
  5. step : Remove the headlight assembly (4:55)
    • Pull up the tabs anchoring the head light assembly
    • Pull out the head light assembly
    • Disconnect the wiring harness.
  6. step : Aim the headlights (6:05)
    • Adjust the adjustor screws to match the old headlight using a Phillip's screwdriver
  7. step : Install the new headlight assembly (7:10)
    • Plug in bulbs and harness
    • Clip into place
    • Bolt in using your 11mm socket and ratchet
  8. step : Install the grille (9:55)
    • Put it into place
    • Secure with the six Phillips screws and Phillips screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:04 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket




Vehicle Fit

  • 1993-1994 Ford Ranger 4 Wheel Drive Black Grille, Headlights & Corner Lights Kit
Part #: 1ABGK00029

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More