This replacement Ranger pickup mirror is just what you need to get your Ford Ranger in good looking form again!

This new, aftermarket mirror features the following specifications:

  • RH (Passenger) Side
  • Folding feature allows mirror to lay flat against the car
  • Includes wiring with rectangular electrical connector just like original
  • Direct replacement
  • Smooth Flat black Finish
  • Unheated

This Ranger mirror makes a great replacement and has substantial cost savings over a dealer unit.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (1:10)
    • Disconnect the negative battery cable.
    • Remove the two Phillips screws behind the door pull.
    • Pull the panel out.
    • Disconnect the harnesses.
    • Remove the Phillips screws and disconnect the power window switch.
    • Remove the two Phillips screws in the door panel.
    • Lift the door panel up and off.
  2. step : Removing the Side Mirror (4:33)
    • Carefully peel off the water shield (If the truck has power mirrors).
    • Remove the 6mm bolts that secure the speaker.
    • Remove the speaker.
    • Disconnect the mirror harness.
    • Remove the three 11mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (6:08)
    • Feed the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the three 11mm nuts.
    • Reconnect the mirror harness.
    • Replace the speaker and the 6mm bolts that secure it.
    • Replace the water shield.
  4. step : Replacing the Door Panel (7:36)
    • Push the door panel down into place.
    • Replace the two Phillips screws in the door panel.
    • Reconnect the power window switch to the switch panel and replace the screws.
    • Reconnect the other harnesses to the switch panel.
    • Line up the panel and push it into place.
    • Replace the two Phillips screws under the door pull.
    • Reconnect the negative battery cable.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 6mm Socket
  • 11mm Socket

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-2003 Ford Ranger Power Flat Black Mirror Passenger Side
Part #: 1AMRE01848


How-to Video:

(08:45 min)