Replaces

1992-96 Toyota Camry Window Regulator - 1AWRG00940

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power

This replacement power window regulator without motor is just what you need to get your Toyota Camry in good shape again!

This power window regulator without motor features the following specifications:

  • LH (Driver Side) FRONT DOOR
  • Replaces dealer part numbers: 69802-06011, 6980206011
  • Power operation
  • Direct replacement
  • Built to strict quality control standards
  • Does not include motor. Buyer will need to reuse original motor
  • Fits sedan and station wagon models only
    • Does not fit 2 door models

This Toyota Camry power window regulator makes a great replacement and has good cost savings over a dealer unit.

Installation

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:56)
    • Remove the sail panel behind the mirror
    • Pry up the door latch bezel with a flat blade screwdriver.
    • Use a Phillips screwdriver to remove the five screws
    • Press the push pins in on the edges and bottom of the door panel and pry it out
    • On the edges of the door panel, remove the push clips by depressing the center and pulling the body of the clip out.
    • Pry up the window switch panel
    • Unplug the switch panel from the wiring harness
    • Pull the door panel off, lifting it up over the lock and door latch
  2. step : Removing the Window Regulator (4:32)
    • Peel back the water shield
    • Disconnect the window motor lead
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the three 10mm bolts from the regulator
    • Remove the three 10mm bolts from the window motor
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (7:50)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the two 10mm bolts into the regulator
    • Insert the three 10mm bolts into the window motor
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Installing the Door Panel (9:38)
    • Thread the wiring harness through the switch panel hole
    • Clip the door panel on, securing with the push clips
    • Depress the body of the clip and push in the center to anchor them on the sides and bottom
    • Screw in the five Phillips screws in the door pull
    • Reconnect the wiring harness to the switch panel
    • Clip the switch panel and the door latch bezel back on
    • Press the sail panel on

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1996Toyota Camry Toyota Camry 4 Door Front Power Window Regulator without Motor Driver Side
Part #: 1AWRG00940


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:17 min)