Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

Specifications:

  • Fits RH (Passenger Side) FRONT DOOR
  • Power operation
  • Replaces dealer part number: 69810-06021, 6981006021
  • Includes the power window motor
  • Motor and regulator come assembled for easier installation
  • Direct bolt on replacement
  • Built to strict quality control standards
  • Fits 4 Door Sedan and Station Wagon Models only
    • Does NOT fit 2 Door Models

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:56)
    • Remove the sail panel behind the mirror
    • Pry up the door latch bezel with a flat blade screwdriver.
    • Use a Phillips screwdriver to remove the five screws
    • Press the push pins in on the edges and bottom of the door panel and pry it out
    • On the edges of the door panel, remove the push clips by depressing the center and pulling the body of the clip out.
    • Pry up the window switch panel
    • Unplug the switch panel from the wiring harness
    • Pull the door panel off, lifting it up over the lock and door latch
  2. step : Removing the Window Regulator (4:32)
    • Peel back the water shield
    • Disconnect the window motor lead
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the three 10mm bolts from the regulator
    • Remove the three 10mm bolts from the window motor
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (7:50)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the two 10mm bolts into the regulator
    • Insert the three 10mm bolts into the window motor
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Installing the Door Panel (9:38)
    • Thread the wiring harness through the switch panel hole
    • Clip the door panel on, securing with the push clips
    • Depress the body of the clip and push in the center to anchor them on the sides and bottom
    • Screw in the five Phillips screws in the door pull
    • Reconnect the wiring harness to the switch panel
    • Clip the switch panel and the door latch bezel back on
    • Press the sail panel on

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
WIndow working great again
Had a window that kept sliding down after a cable broke. This part what relatively easy to replace and no more sudden cold breezes while driving. Getting the bezel off the handle was the trickiest part, but it just took some maneuvering.
March 6, 2017
Worked as Advertized
Fit perfectly and worked the first time. My wife is a happy camper and that makes me smile. I would like to make one suggestion to the installation video. Maybe I missed it, but I did not see the one screw that is located behind the lens of the arm rest lamp. Once I figured that one out it was smooth sailing. Good job!
December 18, 2017
Camry window regulator
This is the 3rd regulator Ive gotten from 1A Auto and it went in easily and operates perfectly. Thanks for the install videos, it lets non mechanics like myself do the job. Toyota wanted $400 to do the job, what a savings. Cheers 1A Auto
June 13, 2018
camry power window
The service I received from 1aAuto was excellent, from the phone call to ask for assistance in ordering the right part for my Camry, to the final check-out, when everything was in order. The part, a power window regulator with motor arrived sooner than promised. That was great. I have since ordered a power window master switch, which I will be installing soon,(when the rain stops and I can work outside on it. I thank 1aAuto for making it alittle easier for me. (the videos helped a lot) Robert Smith
September 18, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1996Toyota Camry Toyota Camry 4 Door Front Power Window Regulator with Motor Passenger Side
Part #: 1AWRG00097


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:17 min)