Replaces

1992-96 Toyota Camry Interior Door Handle - 1ADHI00171

This replacement interior door handle is just what you need to get your vehicle in good working order again!

Specifications:

  • Fits LH (Driver Side) FRONT or REAR
  • Replaces dealer part number: 69206-32071, 6920632071
  • Injection molded Gray plastic
  • Includes lock button
  • Steel center rod and return spring
  • Direct replacement

This interior door handle is a direct replacement and built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

Special Note:

  • This new handle is made to the original color shade.  Due to vehicle age and fading from the sun, our new handles may not match your existing handle or bezel exactly.  If you are looking for an exact match, we recommend replacing handles in pairs or sets.

Part Details

  • Color: Gray

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:55)
    • Pry off the corner trim panel.
    • Remove the bezel around your door panel by prying it up with a flat blade screwdriver.
    • Use your flat blade screwdriver to take off the four covers concealing Phillips screws.
    • Then remove the five Phillips screws with your screwdriver.
    • Remove the two push clips on the side of the door by depressing the center of the clip and pulling the body out.
    • Unclip the door panel and unplug the wiring harness.
  2. step : Remove the door handle (4:01)
    • Remove the three 10 mm bolts.
    • Unclip the lock and door latch rods.
  3. step : Install the door handle (5:21)
    • Clip the door lock and latch rods into the handle.
    • Bolt the handle down into the door with your 10 mm socket and ratchet.
  4. step : Put your door panel back on. (7:38)
    • Check out our other videos for more detailed instructions.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
like a glove
December 13, 2010
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1996 Toyota Camry Front or Rear Gray Interior Door Handle Driver Side

This part replaces:

  • OE # 6926022030
  • Partslink TO1352106
  • DEPO 312-50001-064
Part #: 1ADHI00171


Order must be placed by 4pm ET

How-to Video:

(08:23 min)