Replaces

1992-96 Toyota Camry Exterior Door Handle - 1ADHE00109

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement door handle is just what you need to get your vehicle in good looking form again!

Specifications

  • Driver Side front door
  • Injected molded plastic
  • Black Finish
  • Direct replacement for original handle
  • Fits the front for 2 or 4 door vehicles

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove Door Panel (0:55)
    • Start the with the little panel at the top by the side mirror.
    • Remove the inside door handle bezel.
    • Remove the screw covers from the door panel
    • Remove the screws.
    • Unclip the pushclips on the side of the door.
    • Remove the door panel and disconnect the harness.
    • Disconnect the tweeter speakers if you have them.
    • Remove the plastic watershield.
    • Take care not to rip it.
  2. step : Remove the Door Handle (4:05)
    • Remove the little black piece of shielding to access the 10mm bolt.
    • Move the rod in the locking mechanism to the side.
    • Remove the two 10mm bolts and unclip the yellow clip and push the lock rod aside.
    • Pull the handle down and out.
  3. step : Installing the New Handle. (6:50)
    • Transfer the lock from the old handle.
    • Reconnect the lock rod.
    • Twist the handle in and push.
    • Bolt in your 10mm bolts.
    • Reclip the yellow clip.
  4. step : Put everything back together (9:47)
    • Put your watershield back on and check out our other videos for more detailed door panel installation instructions.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.91/ 5.0
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
1
0
0
0
Perfect fit for my 92 Camry
High quality handle...fit my 1992 Toyota Camry XLE perfectly!
February 6, 2017
Easy install
Very easy to install helps that I am a body man to know how to paint..better t video is a perfect step by step
April 22, 2017
Perfect replacement
I purchased this door handle for a while but did not get a chance to install it until this past weekend. This handle matches perfectly to my broken one. I have it paint to my cars color. I must thank 1A Auto for providing the installation video which gives clear instructions step by step. With my sons help and the video playing along, the job was smooth without any problem. The handle itself feels sturdy and is built with precision.
July 3, 2017
Perfect fit.
The video was very informative and made the replacement easy. Highly recommended.
July 23, 2017
Shipping
Product very good, shipping charges very bad. Have experience as a UPS shipper.
September 2, 2017
Exact fit
The part arrived within a week, and it was even a color match with the original. The video on the website showed me what to do and it all worked out well.
October 10, 2017
Camry door hadle
The part was well priced and shipped earlier than than was promised.The part fit on the car perfectly. The how to video was very helpful for the installation. Overall i was very satisfied with 1A Auto and would order again from them. Thank you 1A Auto.Jim
February 8, 2018
Works fine & fits right.
Door handle for 96 Camry fits/works fine. Job to replace seems easy but was a challenge. Do it slow, have lots different flashlights, magnifying glasses & patience. Hard to see in door access hole & hard to maneuver hand/fingers around inside door to pull off clips from lock/door rods. Be vary careful with the plastic clip attached to the lock cylinder. I broke it & had to order new one from Toyota parts. And then I had the bolts fall down inside the door where I couldnt reach them ! Not fun! But eventually got job done.
February 17, 2018
Camry door handle
Received the handle earlier than estimated, it fit perfectly and with the how to video I installed it in 45 minutes. Just check Toyotas price, youll be amazed at the savings and how easy it is to do it yourself. Thanks 1A Auto. Cheers
March 30, 2018
1994 Camry drivers door handle
This part fits and works perfectly and is significantly less expensive than at the dealership - they wanted $94. Watch the installation video. It will save you time and frustration!
September 11, 2018
Exterior Door Handle
The product I purchase is extremely satisfied. The door handle is more stronger and better than the manufactory. I tell everyone who is looking for auto. parts to first look at and purchase 1A Auto. If you are not sure how to install a part, 1A Auto video show how to install. 1A Auto is certainly a 5 star place to go. Larry Hansard
October 6, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1996Toyota Camry Toyota Camry Front Exterior Door Handle Driver Side
Part #: 1ADHE00109


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:45 min)