Replaces

1992-96 Toyota Camry Exterior Door Handle Pair - 1ADHS00026

This replacement Toyota Camry rear door handle pair is just what you need to get your Toyota in good looking form again!

Specifications

  • Comes as a Pair for the rear doors
  • Injected molded plastic
  • Black Finish
  • Direct replacements for original handles
  • Fits 4 door vehicles
  • Does not fit front doors

These parts are a direct bolt on and built to strict quality control standards. They are a great replacement and have substantial cost savings over dealer units.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:55)
    • Pry up the door latch bezel with a flat blade screwdriver.
    • Do the same to the switch panel.
    • Unplug the switch panel from the wiring harness.
    • Use a Phillips screwdriver to remove the screws in the door pull.
    • On the edges of the door panel, remove the push clips by depressing the center and pulling the body of the clip out.
    • Pull the door panel off, lifting it up over the lock and door latch.
  2. step : Remove the door handle (3:05)
    • Carefully pull back the water shielding.
    • Disconnect the door handle by prying the rods off the pin connecting them to the inner door latch.
    • Use a screwdriver to remove the lock mechanism.
    • Pry out the child lock knob with a flat blade screwdriver.
    • Remove the two 10 mm bolts securing the door handle.
    • Pull the door handle out.
  3. step : Install the new door handle (5:30)
    • Clip the door handle into the door.
    • Reconnect the latch and lock rods.
    • Bolt the door handle into the door with your 10 mm socket and driver.
    • Secure the locking mechanism with the Phillips screws and driver.
    • Snap the child lock knob back in.
    • Reconnect the latch and lock rods to the pin connecting them to the inner door latch.
    • Replace the water shield, making sure you have a good seal.
  4. step : Put the door panel back together. (9:00)
    • Thread your wiring harness through the switch panel hole.
    • Clip the door panel on, securing with the push clips.
    • Depress the body of the clip and push in the center to anchor them.
    • Screw in the two Phillips screws in the door pull.
    • Reconnect the wiring harness to the switch panel.
    • Clip the switch panel and the door latch bezel back on.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Good as New!
Received quickly, followed the video, first handle took about 25 minutes second half the time! Done both front and back exterior doors. Great products!
February 13, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-1996Toyota Camry Toyota Camry 4 Door Exterior Door Handle Pair Rear

This part replaces:

  • Dorman 77386, 77401
Part #: 1ADHS00026


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:42 min)