Replaces

1992-94 Toyota Camry Lighting Kit - 1ALHT00033

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Parking Lights
      (2) Headlights

Specifications:
  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Hadnling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Replace the bulbs (0:52)
    • Open the hood and reach behind the Headlight Assembly.
    • Remove the bulb by twisting and pulling it out.
    • Push the tab to unclip it from the harness.
    • Reverse process to install the new bulb.
  3. step : Remove the side marker light assembly (1:35)
    • Remove the Phillip's screw securing the side marker light assembly
    • Use a flat head screwdriver and a rag to pry out the parking light assembly
  4. step : Remove the grille (2:05)
    • Use pliers to remove the clips and the grille.
    • Set aside.
  5. step : Remove the head light assembly (2:40)
    • Unbolt the four bolts using your 10 mm socket and ratchet
  6. step : Install the new head light assembly (3:45)
    • Bolt the four 10 mm bolts back in using your socket and ratchet.
    • Clip the grille back into place and secure with the Phillips screws.
    • Clip the side marker light assembly back in
    • Screw in the screw using your Phillip's screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
2
0
0
0
headlight kit
I am a retired heavy line tech so I kind of know what I am doing. The headlights themselves required a little finagling but the final results were as expected. The corner lights just didnt fit. The rubber seals around the lights were coming off and they just wouldnt snap into place. The original corner lights snapped back in with no problem and because they werent all that bad I left well enough alone. I plan on ordering alot more stuff for this car and hope they fit a little better.
March 7, 2017
Watched the video before I purchased this item. Just what they showed was exactly how to install it. Very happy with the purchase it fit like a glove...
November 24, 2017
Good lights, some issues installing
The lights look and work great. We did have a problem with installation. The upper plastic flange on the parking lights was about 1/8 of an inch short-did not line up well with the screw hole. That piece should be made longer so you can adjust it to fit. We had to stretch it and screw it in on an angle.
October 2, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1994Toyota Camry Toyota Camry 4 Piece Set Lighting Kit
Only 3 left in stock
Part #: 1ALHT00033


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:13 min)