These replacement exterior door handles are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Durable construction
  • Replaces dealer part numbers: 6W7Z-5426604-A, 6W7Z-5426605-A, 6W7Z5426604A, 6W7Z5426605A
  • Direct replacements for original handles
  • Built to strict quality control standards

These exterior door handles are great replacements and have good cost savings over dealer units.

Part Details

  • Quantity: Pair
  • Color: Chrome & Black

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:50)
    • Pry the switch panel trim piece with a flat blade screwdriver
    • Disconnect the mirror switch wiring harness
    • Disconnect the window switch wiring harnesses
    • Disconnect the door lock wiring harness
    • Remove the caps from the pull handle
    • Pry the bezel from the door handle with a flat blade screwdriver
    • Remove the Phillips screws from the pull handle and side and bottom of the door
    • Lift the door panel up and off
    • Disconnect the trunk switch wiring harness
    • Carefully peel off the water shield
  2. step : Removing the Outside Door Handle (3:06)
    • Remove the yellow clip from the door lever
    • Knock the rivets out from the outside door handle with a hammer and punch
    • Drill the rivet away with a 3/8 drill bit
    • Unlatch and remove the outside door handle
    • Knock the pieces of the rivet out with a hammer and shave the rivet with a 3/8 drill
  3. step : Installing the New Outside Door Handle (4:52)
    • Twist the door lever to the door handle
    • Insert the door handle into the door
    • Feed the Phillips screws with locknuts into the door handle
    • Tighten the Phillips screws with a Phillips screwdriver and wrench
    • Reconnect the door lever to the yellow clip
  4. step : Reinstalling the Door Panel (7:13)
    • Put the water shield into place
    • Lift the door panel into place
    • Connect the trunk switch wiring harness
    • Push in the door panel clips
    • Insert and tighten the two Phillips screws at the pull handle
    • Insert and tighten the two Phillips screws at the bottom of the door panel
    • Connect the window switch wiring harnesses
    • Push in the window switch panel
    • Push on the trim piece inside the door handle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 3/8 Inch Drill Bit

  • General Tools

  • Hammer
  • Flashlight
  • Center Punch

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver
  • Impact Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-2011Ford Crown Victoria Ford Crown Victoria Chrome & Black Exterior Door Handle Rear Pair
1992-2011Mercury Grand Marquis Mercury Grand Marquis Chrome & Black Exterior Door Handle Rear Pair

This part replaces:

  • OE # 6W7Z 5426604 A
  • OE # 6W7Z 5426605 A
Only 2 left in stock
Part #: 1ADHS00106


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:21 min)