1990-96 Chevy Corvette Weatherstrip Seal Kit - 1AWSK00101

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   13 Piece Set

This is a complete weatherstrip kit and more. All components in this kit are the highest quality reproductions.


  • Kit Includes:
    • (2) - Door Weatherstrips - LH (Driver Side) & RH (Passenger Side)
    • (2) - Targa Top Side Seals - LH (Driver Side) & RH (Passenger Side)
    • (1) - REAR Targa Top Seal - (Mounts to Body)
    • (1) - REAR Glass Hatch Seal
    • (1) - Windshield Header Seal
    • (2) - Fender Well Seals
    • (1) - 4 Piece Window Belt/Sweep Set
  • Direct replacement
  • Built to strict quality control standards

This weatherstrip kit makes a great replacement and has good cost savings over the dealer parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Mercaptobenzothiazole, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:48)
    • Disconnect the negative battery cable with an 8mm wrench
  2. step : Removing the Hatch Seal (0:55)
    • Remove the Phillips head screws from the rear hatch trim panel
    • Pull off the rear hatch trim panel
    • Loosen the Phillips screws from the remaining hatch trim panels
    • Pull off the hatch seal by hand
  3. step : Preparing the Hatch (2:37)
    • Clean the hatch seal channel with a shop vacuum
    • Clean the hatch seal channel with soapy water
    • Clean the hatch seal channel with mineral spirits
    • Scrape off any adhesive residue with a razor blade
  4. step : Installing the New Hatch Seal (3:59)
    • Unclip the hatch supports at the top
    • Have an assistant hold the hatch up
    • Position the seal
    • Push the hatch supports into place
    • Feed the hatch seal into the channel
    • Apply weatherstrip adhesive to the seal channel
    • Push the seal into the channel
    • Push the trim panels into place
    • Tighten the Phillips screws into the trim panels
    • Apply silicone lubricant to the hatch seal
    • Close the hatch
    • Keep the hatch closed to compress the seal
  5. step : Reconnecting the Battery (7:08)
    • Reconnect the negative battery cable with an 8mm wrench

Tools needed for replacement:

    General Tools

  • Assistant
  • Razor Blade / Gasket Scraper

  • Materials, Fluids, and Supplies

  • Soapy Water
  • Sponge
  • Mineral Spirits
  • Gasket Adhesive
  • Cloth Rags

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Vacuum

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1990-1996Chevy Corvette Chevy Corvette Coupe Weatherstrip Seal Kit 13 Piece Set
Part #: 1AWSK00101

Out of Stock

How-to Video:

(07:23 min)