1988-97 Oldsmobile Cutlass Supreme Exterior Door Handle - 1ADHE00037

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Color:   Gloss Black

This replacement Oldsmobile Cutlass Supreme outside door handle has been redesigned and strengthened to correct the earlier breaking problem of the original units. It's just what you need to get your vehicle in good looking form again!


  • LH (Driver Side)
  • Durable metal construction
  • Direct replacement for original handle
  • Gloss Black Finish
  • Comes with handle mechanism and pillar plate
  • Includes vertical metal door molding
  • Reuse your original lock cylinder
  • Fits 2 Door Coupe models
  • NOT designed for International Series models

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:07)
    • Remove the screws from the door panel
    • Pry off the lower door panel with a putty knife
    • Pry off the window switch with a putty knife
    • Disconnect the window switch wiring harnesses
    • Pry off the inner door handle with a putty knife
    • Disconnect the door handle
    • Pry off the door panel with a putty knife
    • Pull the door panel up and off
    • Remove the bolts from the seat belt
    • Remove the bolts from the door panel bracket
    • Pull off the door panel bracket
    • Disconnect the seat belt
    • Pull the seat belt aside
    • Peel back the water shield
    • For more detailed instructions, please see the 1992 Lumina door panel replacement video
  2. step : Removing the Outside Door Handle (2:38)
    • Connect the window switch wiring harnesses
    • Pry off the access hole plug with a flat blade screwdriver
    • Remove the two 10mm bolts from the outside door handle
    • Unclip the latch rod
    • Pull out the latch rod
    • Pull out the door handle
  3. step : Installing the New Outside Door Handle (3:51)
    • Hold the latch rod in place
    • Attach the door handle to the latch rod
    • Push the new handle into place
    • Clip on the latch rod
    • Insert the two 10mm bolts into the door handle
    • Test the door handle
    • Push on the access hole plug
  4. step : Reinstalling the Door Panel (7:00)
    • Disconnect the window switch wiring harnesses
    • Put the water shield into place
    • Connect the seat belt
    • Push on the door panel bracket
    • Insert the bolts into the door panel bracket
    • Put the seat belt into place
    • Insert the bolts into the seat belt
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the inside door handle
    • Push the door handle into place
    • Connect the window switch wiring harnesses
    • Push the window switch into place
    • Push the lower door pane into place
    • Insert the screws into the door panel
    • For more detailed instructions, please see the 1992 Lumina door panel replacement video

Tools needed for replacement:

    Allen Wrenches

  • 5/64 Allen Wrench

  • General Tools

  • Putty Knife

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket
  • 7mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T7 Torx Driver

4.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
nice product
Great OEM part but this part should include the plastic bushings needed to reinstall the latch.
March 1, 2017
Good product, quality is outstanding.
Great quality, easy fit just like OEM. Only had the part did not have the Locking tabs which are a 1 time use item. So when you replace the original and install the new you will be short or at a loss, had to run to an Acehardware to complete task. Just would have been nice to know. Video does not explain this and is technically not the correct video for the vehicle.
January 7, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1988-1997Oldsmobile Cutlass Supreme Olds Cutlass Supreme 2 Door Coupe Gloss Black Exterior Door Handle Driver Side
Only 1 left in stock
Part #: 1ADHE00037

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:32 min)