Replaces

1988-92 Chevy K1500 K2500 GMC K1500 K2500 Steering & Suspension Kit 14 Piece Set TRQ PSA58773 - 1ASFK01890

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   14 Piece Set
  • Kit Includes:
      (2) Tie Rod Adjusting Sleeves
      (2) Front Lower Ball Joints
      (1) Pitman Arm
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Upper Ball Joints
      (1) Idler Arm
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Diagnosis (1:15)
    • To check to see if you have a bad pitman arm, jack up your car and secure it.
    • Move your wheel and if there is play in your pitman arm and joint.
  2. step : Remove the skid plate (1:55)
    • Unbolt the four 15 mm bolts.
    • Remove the kid plate and set aside.
  3. step : Prepare the steering box to access the pitman arm (2:10)
    • Unclip and move aside the plastic shield.
    • Spray the two fittings and the bolt with penetrating oil.
    • Loosen the power steering coupling bolt.
    • Use a fitting wrench to remove the two fittings and an 11 mm socket and ratchet and extension to remove the bolt.
    • Have a helper hold the steering wheel for you while you do this to make it easier.
    • Use a pry bar to move the steering shaft from the steering box.
  4. step : Remove the steering box and pitman arm (4:35)
    • Use a 21 mm bolt to remove the bolt mounting the pitman arm.
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three bolts securing the steering box and remove the steering box completely to remove the pitman arm.
    • Put the steering box and pit man arm in an oil pan.
    • Use an impact wrench or a large breaker bar as well as a pitman arm puller to remove the pitman arm from the steering arm.
  5. step : For reinstallation please see part 2 (8:10)

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Assistant
  • Hammer
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 34mm Socket
  • 15mm Socket
  • 21mm Socket
  • 11mm Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench

4.25/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
1
0
0
Could use a torque chart.
Ive never done an entire front end before and the kit includes all parts and bolts. I wasnt too excited to see that there was no nylock nuts, no locking nuts, amd no lock washers in the kit anywhere so i went to home depot and bought extra lock washers for everything. There also is no sort of torque specs for any of the parts, no instructions, no locktite. When I called to ask for these things i was told the kit doesnt come with the extra hardware and then was 1st hung up on when i asked for the torque specs and the 2nd time was put on hold for nearly 10 minutes to be told they dont even have any of that information available. Considering i sheared one of the bolt heads off at 40lbs of torque and the specs in the Haynes manual called for 36 is disconcerting and i hope the rest of the parts actually hold up.
August 20, 2018
Great product
I would have given it a 5 star but I also ordered the control arms separate because I didnt find a set that included them. After I received my order I was back on their site looking for more parts and I then seen the complete set with the arms for cheaper than what I spent. Other than that, great product and great shipping time.
February 14, 2019
all the parts were there, didnt put the pitman arm in yet, would be nice if they added the steering box as well in a set. Very satisfied with the product!
July 15, 2019
Everything fits
I havent driven the truck yet, more work to do still, but all the front suspension parts bolted right up, no problem
September 28, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Would this fit a heavy half ton model?
Chase H March 4, 2019
This kit will fit 1500 models and 4 wheel drive only. Depending on the year of the truck you will need 6 lug wheels. Hope this helps!
Corey M March 4, 2019
will this fit my 1987 gmc sierra?
Quency T July 15, 2019
This kit is not listed to fit any 1987 models. We would need more information regarding your vehicle in order to search for the correct kit for your vehicle.
Christa R July 15, 2019
Year Make Model Description
1988-1992Chevy K1500 Truck Chevy K1500 Truck Steering & Suspension Kit 14 Piece Set
1988-1992Chevy K2500 Truck Chevy K2500 Truck with 6 Lug Wheels Steering & Suspension Kit 14 Piece Set
1988-1992GMC K1500 Truck GMC K1500 Truck Steering & Suspension Kit 14 Piece Set
1988-1992GMC K2500 Truck GMC K2500 Truck with 6 Lug Wheels Steering & Suspension Kit 14 Piece Set
Part 1ASFK01890
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA58773