Replaces

1988-91 Toyota 4Runner Pickup Spark Plug Wire Set - 1AESW00009

This replacement Ignition Wire Set is just what you need to get your vehicle in good running order again!

These Spark Plug wires feature the following specifications:

  • Conductive Silicone/Aramid core
  • Extra thick EPDM Insulation
  • Fiberglass Braid
  • High Grade Silicone outer Jacket
  • Heavy Duty `Stepped' Silicone boots
  • Zinc coated snap lock terminals

This Ignition Wire set is a great replacement and has good cost savings over a dealer unit.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Spark Plug Wires (0:51)
    • Replace them one at a time.
    • Follow the one you want to replace and remove any clips securing the wires and remove them.
    • Twist and pull the spark plug wire free.
    • Pull the other end of the wire free.
  2. step : Replacing the Spark Plug Wires (2:42)
    • Switch over the armor onto the new wires.
    • Feed the wire down and on to the spark plug.
    • Push the top part of the wire down into place.
    • Put the wire back into the clip.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1988-1991Toyota 4Runner Toyota 4Runner Spark Plug Wire Set V6 3.0L
1988-1991Toyota Pickup Toyota Pickup Spark Plug Wire Set V6 3.0L
Only 2 left in stock
Part #: 1AESW00009


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:30 min)