1987-92 Chevy Camaro Pontiac Firebird Weatherstrip Seal Kit - 1AWSK00292

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This GM F-Body Convertible Top aftermarket replacement weatherstrip kit includes the following pieces:

  • 4 Convertible Top Roofrail Seals
  • 2 Door Seals
  • 1 Convertible Rear Bow Seal
  • 1 Convertible Top Header Bow Seal
  • 2 Front Window Triangle Seals
  • 1 Tonneau Cover Seal (door that covers convertible top when down)

If your weatherstripping is causing leaks allowing damaging rain in, then this weatherstrip kit is for you. Why not replace your old, hardened, rotted seal with this new, ready to install weatherstrip set.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Mercaptobenzothiazole, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    It's recommended to mark bags and organize the parts accordingly as you remove them

  1. step : Removing the Door Panel (1:30)
    • Disconnect the negative battery cable
    • Remove the three T27 screws on the door pull
    • Remove the six T10 screws on the switch panel
    • Pull the lock button back
    • Disconnect the lock wiring harness with a flat blade screwdriver
    • Remove the T10 Torx screw behind the lock button
    • Remove the mirror control
    • Remove the retaining clip from the mirror control with a flat blade screwdriver
    • Pry behind the lock with a flat blade screwdriver
    • Slide the side panel back and out
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Lift up on the door molding and remove it
    • For more detailed instructions, please see the '86 Camaro IROC-Z door panel replacement video
  2. step : Removing the Triangle Seal (2:44)
    • Remove the two Phillips screws holding the top of the weatherstrip
    • Peel the top of the weatherstrip back
    • Carefully peel the water shield
    • Remove the 10mm nuts from the bracket attached to the triangle seal
    • Remove the two 10mm bolts from the door
    • Lift the triangle seal out of the door
  3. step : Separating the Triangle Seal (5:12)
    • Warm up both sides of the triangle seal with a heat gun
    • Pull the triangle seal off with a pair of pliers
    • You can try this process to skip removal of the door panel, though it is not recommended

Tools needed for replacement:

    General Tools

  • Heat Gun
  • Putty Knife

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 7mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T27 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench
  • 7mm Wrench
  • 8mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1987-1992Chevy Camaro Chevy Camaro Convertible Weatherstrip Seal Kit
1987-1992Pontiac Firebird Pontiac Firebird Convertible Weatherstrip Seal Kit
Part #: 1AWSK00292

Out of Stock

How-to Video:

(08:19 min)