Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you the front marker or signal-light replacement on this '86 IROC-Z, same as many Camaros from this decade or from this era. The only tool you'll need is a 10 millimeter wrench or a socket with a ratchet.
Take a quick look before we replace that blinker front-marker light, and then after the new light, much clearer and shinier. It let' the car smile a little more, if you will. Maybe you've got a nicer vehicle than ours, but you just haven't even realized how much that these lights have faded out, and as you can see, replacing them is a quick way to just add just a little more smile to the front end of your Camaro. The last obvious note is we have it up on a lift, but that's not necessary. It just makes it a whole lot easier to film for you.
To change that light, you're going to go up underneath, and you can see that there's a 10 millimeter bolt right here in the back of the light. Remove that bolt using a 10 millimeter socket with a ratchet. I'm just going to speed up through here as I take that bolt out. Again, it's 10 millimeter. I'm using a socket and ratchet, but you can easily use a 10-millimeter wrench, as well. Push the light out. There's a little thumb tab here. Press that down. Twist counterclockwise, and the bolt comes out.
While that light is out, I just take a little bit of soap and water and clean out the socket area, make it look nice and fresh.
The light from 1A Auto has a little shipping protector on it. Pull that off. This goes in just like originally. Just slide it into place. We'll do a little more fast-forwarding here as I just put that 10-millimeter bolt back in, and you can use your original bolt with the new light, no problem. Here's just another quick look at your refreshed and just a little bit happier Camaro on the ground.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
