1985-88 Ford Ranger Fuel Tank Sending Unit - 1AFSU00065

This gas tank sending unit is a new aftermarket replacement part. It is just what you need to bring life back to your fuel gage on your dashboard.

So if your fuel tank sending unit is broken, rusted out, rotted or just plain defective, this is the part for you!


  • LH (Driver side)
  • Replaces dealer part numbers: E5TZ 9275 M, E5TZ 9275 M, E8TZ9H307BA, E8TZ 9H307 BA
  • 4 Pin Connection
  • Outlets: 2
  • Rheostat range (10-80 Ohms)
  • Assembly includes:
    • Sender
    • Float
    • Strainer
    • Lock Ring
    • Lock Ring gasket
  • Fits Standard CAB models with FUEL INJECTION and the following gas tank capacity as listed:
    • 17 Gallon
  • Does not include fuel pump
    • Buyer will need to reuse original fuel pump



Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this work for an 1984 2.8L ranger?
S J on Jan 20, 2017
BEST ANSWER: This sending unit is not correct for your vehicle, and it will not fit. Also we do not carry any sending units for your 1984 Ranger, we only carry a mechanical fuel pump under part number ATFPU00001.

Vehicle Fit

  • 1985-1988 Ford Ranger Regular Cab with Fuel Injection Fuel Tank Sending Unit Driver Side

This part replaces:

  • OE # E5TZ 9275 M
  • Dorman 692-111
  • Spectra Premium Industries TNKFG37B
Part #: 1AFSU00065