1984-92 Chevy Camaro Camaro Molded Dash Pad Cover - 1AIDC00055

Warranty & Shipping
Product Reviews
Vehicle Fit

Our new vacuum formed plastic dash caps are a great solution to your faded, dry, or cracked auto dashboard. They are designed to easily install over the original dash pad. When properly installed they look great and are very hard to tell from an original.


  • Material - Laminated with a UV resistant material
  • Flexibility - Made from a versatile plastic that allows almost rubber like flexibility
  • Finish - Dull sheen to minimize glare
  • Grain - Matches the original
  • Comes with adhesive and installation instructions
  • Made in the U.S.A.

This dash pad cover is molded in black. The customer can paint the product for an exact match. The manufacturer recommends SEM brand vinyl paints for re-coloring these dash pad covers.

This interior replacement dash pad cap is a breakthrough for the aftermarket and is perfect for any auto or truck restoration project!

48 States Only:

Due to shipping restrictions, we can only ship this to a physical address within the Contiguous U.S. (lower 48 states).

Item Condition: New

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

2.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Looks can be deceiving
Honestly, when this dash pad arrived it looked great. I was eager to get it in my car. Instructions were clear about installation so that was good. Then came the trouble. I would recommend having two people do a dashpad install. you have to have some finesse with it. When test fitting the pad as per instructions the corners started to crack and break off into little chips completely. This cap is more brittle than my 30 year old original dash! I pushed through and completed the install but there is no room for the air vents to click into the pad once I finished the install. I followed the directions and now I have a big hole where my defroster vent is supposed to be. To try to put the vents in now I would have to try and pry away the adhesive but I dont see this dash survivng that. Disappointed to say the least.
May 14, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this a replacement for the original dash or just a cover to put over the original dash?
Daniel D May 16, 2016
This is a dash cap/overlay. Not a replacement dash pad
Brian F May 16, 2016
It is a cover to fit over the original dash. Mine fit like a glove with no adjustments and makes the car look 20 yrs. younger.... VERY happy with my purchase.
Anne M May 17, 2016
Hi Daniel. It is a cover but I have to say it looks really good and it fit like a glove.
Christian W May 17, 2016
Does cover have all holes cut for access.speakers?
Joe B October 10, 2016 glues over the original dash and fits great.
Christian W October 11, 2016
JIM G October 11, 2016
Yes, This will slip right over the dash as long as you have matched the year, make, and model. Thank you.
Derek C October 11, 2016
What is the brand name of this item?
James C July 2, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K July 6, 2017
Does this cover wrap around and under the front edge completely? I have stripped my dash to bare foam and would like to glue this down in place of the original material, but I want to make sure that no foam will show.
Steve H January 4, 2018
yes it worked perfect covered the whole dash.
BRIAN R January 4, 2018
No foam will show and you will have to cut it around the pad so it fits correctly I took my dash pad out put the cover on and trimmed the excess that way and it still took a few tries before it fit good. The job is overall very easy and I didn’t even glue mine down because after I trimmed it to fit it just fit that good that I felt it wasn’t necessary!
I T January 4, 2018
It does. The foam won’t show. Although we didn’t strip it down to bare foam just peeled off pieces of the dash that were preventing the cover to fit correctly. Hope this helps.
H E January 5, 2018
No, it just snaps right over your existing dash..
Steve L January 16, 2018
Year Make Model Description
1984-1992Chevy Camaro Chevy Camaro Camaro Molded Dash Pad Cover
Part #: 1AIDC00055

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout